| 10 Degree Angled Tube Clamp, 30mm, SS |
-
-
The Endurance provides a combination of comfort and dynamics to users, offering natural gait with less fatigue and ultimately less strain on the lower back and sound side. The split keel and heel design enhance eversion and inversion compliance. The carbon fiber construction promotes conversion of weight bearing energy input into energy output. Beige foot shell included.
The Endurance is light-weight and has a cosmesis-friendly profile which makes it easy to cover.
-
The 1752T, Adjustable Height Double Ended Adapter, Heavy Duty is to be exclusively used for the prosthetic fitting of lower extremity amputations. The Heavy Duty Adjustable Height Double Ended Adapter is used to connect any pyramid system on both ends of the receiver. The four set screws are used for anchoring the mating pyramid system as well as for making angular adjustment for alignment. The clamp screw can be loosened and the corresponding threaded tube section can be lengthened up to a maximum of 12.7mm/0.5 in from fully threaded in position. The total build height range is from 75mm to 87mm. Apply Loctite to all screws once the alignment and connection are finalized, this includes the threaded tube section to prevent rotation. Warranty: 2 Years Weight limit: 136 kg/300 lbs -
This 3-Prong Pyramid Connector is used for lamination onto transfemoral socket. Warranty: 2 year Product Weight: 127g Weight Limit: 125kg / 275lbs -
The 3-prong adapter is used for lamination onto transfemoral socket. The adapter provides 360º of rotation for pyramid adapter or pyramid receiver. This product can be used with the 1215T, 1225T/S or 1216T/S. The 1221S is manufactured by a forged and machined combination resulting in a strong and light weight product. Warranty: 2 year Material: Stainless Steel Product Weight: 116g Weight Limit: 136kg / 300lbs -
Has all the same features as the Maglock, but has a suspension strength of 90 lbs. -
The ST&G Eclipse Pump (EP) is a removable elevated vacuum system, incorporating a fabricated space in the distal end of the socket where the pump functions similar to a distal end pad. The EP is engineered out of a medical grade silicone polymer with two valves to control the airflow. As part of a liner and sealing sleeve system, the pump is activated to push out air from the user’s weight during initial contact, and then draws in interior air to provide elevated vacuum after toe off during swing phase. The EP is available with 2 different vacuum levels to accommodate various activity levels and skin conditions.
-
The Aluminum 4-Ear Connector provides an option for a one step lamination into a transtibial socket. A lamination cover is included with every 4-ear connector. The 1220A is manufactured by a forged and machined combination resulting in a strong and light weight product. Warranty: 2 yearProduct Weight: 63g
Weight Limit: 114kg / 250lbs
-
The Stainless Steel 4-Ear Connector provides for a one step lamination into a transtibial socket. A lamination cover is included with every 4-ear connector. The 1220S is manufactured with high strength stainless steel alloy resulting in a strong and light weight product. Warranty: 2 yearProduct Weight: 97g
Weight Limit:125kg / 275lbs
-
The non-rotatable 4-hole aluminum pyramid adapter attaches to any socket or knee with a 4-hole pattern. Four flat head screws are provided with every pyramid. The 1217A is manufactured by a forged and machined combination resulting in a strong and light weight product. Warranty: 2 yearProduct Weight: 81g
Weight Limit: 114kg / 250lbs
Torque Value: M6 Flat Head Screw (Mount Screw) / Torque: 10 Nm / Hex: 4mm wrench
-
The non-rotatable 4-hole stainless steel pyramid adapter attaches to any socket or knee with a 4-hole pattern. Four flat head screws are provided with every pyramid. The 1217S is manufactured from high strength stainless steel alloy resulting in a strong and light weight product. Warranty: 2 yearProduct Weight: 111g
Weight Limit: 125kg / 275lbs
Torque Value: M6 Flat Head Screw (Mount Screw) / Torque: 10 Nm / Hex: 4mm wrench
-
The 4-Hole Connector, Receiver is used to connect to any 4-hole thread system and pyramid connection. Used 4 flat head screws to connect to 4-hole connector. 4 set screws are used for anchoring the making pyramid system as well as for making angular adjustment for alignment. Apply recommended torque to alignment adjustment screws for connection. Apply loctite to all screws once the alignment and connection is finalized. Warranty: 2 yearProduct Weight: 84g
Weight Limit: 114kg / 250lbs
Torque Value: M8 Set Screw (Alignment Adjustment Screw
Torque: 10 Nm Hex: 4mm wrench -
The 4-Hole Connector, Receiver is used to connect to any 4-hole thread system and pyramid connection. Used 4 flat head screws to connect to 4-hole connector. 4 set screws are used for anchoring the making pyramid system as well as for making angular adjustment for alignment. Apply recommended torque to alignment adjustment screws for connection. Apply loctite to all screws once the alignment and connection is finalized. Warranty: 2 yearProduct Weight: 60g
Weight Limit: 125kg / 275lbs
Torque Value: M8 Set Screw (Alignment Adjustment Screw) / Torque: 15 Nm / Hex: 4mm wrench
-
The 4-Hole Rotating Base provides 360º of rotation for pyramid adapter or pyramid receiver. Used with the 1215T, 1225T/S or 1216T/S. All attachment screws are provided with 4-hole base. The 1214T and 1214S is manufactured by a forged and machined combination resulting in a strong and light weight product. Warranty: 2 yearProduct Weight: 120g
Weight Limit: 125kg / 275lbs
-
The 4-Hole Threaded Plate is used for socket attachment. It can be used in thermoplastic and laminated socket application. The 4-hole pattern matches the standard 4-hole adapter with pyramid or receiver. Warranty: 2 year Product Weight: 65g Weight limit: 125kg / 275lbs -
The 4-Hole Threaded Plate with Center Hole is used for socket attachment. It can be used in thermoplastic and laminated socket application. The 4-hole pattern matches the standard 4-hole adapter with pyramid or receiver. Warranty: 2 year Product Weight: 39g Weight Limit: 125kg / 275lbs -
The 4-Prong AK adapter is used for lamination onto transfermoral socket. The AK Rotating Base has a new design for improved strength and alignability. This is the ideal base for flexion contracture. It has a manufactured pre-bent prong for ease of alignment and strength. The adapter provides 360 degree of rotation for pyramid adapter or pyramid receiver. This product can be used with the 1215T, 1225T/S or 1216T/S and all EZ ADAPT SERIES. Warranty: 2 year Material: Stainless Steel Product weight: 159g Weight limit: 136kg / 300lbs Torque value: M6 Cap Screw Torque: 10 Nm Hex: 5mm wrench -
The 4-Ear Connector with Rotating Receiver provides an option for a one step lamination into a transtibial socket. The 1257T consists of 1223T (4-Prong Rotating Base) and 1216T (Rotating Receiver). Warranty: 2 year Product Weight: 12g Weight Limit: 136kg / 300lbs Torque Value: M8 Set Screw (Alignment Adjustment Screw) Torque: 15 Nm Hex: 4mm Wrench -
The 4-Prong Adapter is used for lamination onto transtibial socket. The adapter provides 360º of rotation for pyramid adapter or pyramid receiver. This product can be used with the 1215T, 1225T/S or 1216T/S. The 1223T is manufactured from high quality and strong product. Warranty: 2 year Product Weight: 64g Weight Limit: 136kg / 300lbs -
EZ ADAPT components provide versatility to shift and/or rotate as needed, bringing easy solutions to prosthetic alignment needs without adding significant weight or modifying the prosthetic socket. The 1723T angled offset receiver is designed to give 7.5 degrees of angulation and 12.6mm of offset. This simple and light space saving device also gives the added benefit of rotation. Warranty: 2 Year Weight Limit: 136kg / 300lbs -
The 1209A Aluminum Tube has a diameter of 30mm and length of 385mm. It is extruded and shot peened for an optimum strength. It can be cut to length for use.Warranty: 2 Year
Product Weight: 227g
Product Length: 385mm / 15inWeight Limit: 136kg / 300lbs
-
The aluminum fixed adapter with 30mm aluminum tube has a permanent adapter at one end. It can be cut to length. This one piece tube clamp assembly design makes this adapter great for aligning a prosthesis where space is limited. The aluminum adapter and tube combination is 3D forged and machined for optimum fatigue strength. This combination creates high quality and durable product while maintaining the light weight. Warranty: 2 year Material: Aluminum Weight: 280g Weight Limit: 114kg / 250lbs -
The aluminum fixed adapter with 30mm aluminum tube has a permanent adapter at one end. It can be cut to length. The aluminum adapter is forged and machined while the aluminum tube is extruded and shot peened for an optimum fatigue strength.This combination creates high quality, durable and strong component. Warranty: 2 yearProduct Weight: 307g
Weight Limit: 114kg / 250lbs
Product Length: 400mm / 15 3/4″Torque Value: M8 Set Screw / Torque: 10 Nm / Hex: 4mm wrench
-
Sale!
EZ ADAPT components provide versatility to shift and/or rotate as needed, bringing easy solutions to prosthetic alignment needs without adding significant weight or modifying the prosthetic socket.Warranty: 2 Year
EZ ADAPT components provide versatility to shift and/or rotate as needed, bringing easy solutions to prosthetic alignment needs without adding significant weight or modifying the prosthetic socket. Diagonal offset 4-hole pyramid (provides up to 12mm of offset) Weight limit: 300 lbs / 136 kg -
With pyramid receivers on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited.Warranty: 2 Year
Height: 32mm Product Weight: 75g Weight limit: 125kg / 275lbs -
With pyramid and pyramid receiver on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited.Warranty: 2 Year
Height: 45mm Product Weight: 121g Weight limit: 125kg / 275lbs -
Sale!
With pyramid and pyramid receiver on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited.
Warranty: 2 Year
Height: 45mm Product Weight: 86g Weight limit: 125kg / 275lbs -
With pyramid and pyramid receiver on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited. They are available in 32mm, 45mm, 60mm and 75mm height. Material: Stainless steel Height: 60mm Product Weight: 166g Weight Limit: 125kg / 275lbs Torque Value: M8 Set Screw Torque: 15 Nm Hex: 4mm wrench -
With pyramid and pyramid receiver on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited. They are available in 32mm, 45mm, 60mm and 75mm height. Material: Titanium Height: 60mm Product Weight: 99g Weight Limit: 125kg / 275lbs Torque Value: M8 Set Screw Torque: 15 Nm Hex: 4mm wrench
-
With pyramid and pyramid receiver on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited. They are available in 32mm, 45mm, 60mm and 75mm height.Warranty: 2 Year
Height: 75mm Weight: 188g Product weight: 125kg / 275lbs Torque value: M8 Set Screw Torque: 15 Nm Hex: 4mm wrench -
With pyramid and pyramid receiver on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited. They are available in 32mm, 45mm, 60mm and 75mm height.Warranty: 2 Year
Height: 74mm Weight: 111g Product weight: 125kg / 275lbs Torque value: M8 Set Screw Torque: 15 Nm Hex: 4mm wrench -
With pyramid receivers on both ends, this stainless steel adapter provides excellent adjustability options when clearance is limited.Warranty: 2 Year
Material: Stainless Steel Height: 32mm Weight: 144g Weight Limit: 125kg / 275lbs -
With pyramid receivers on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited.Warranty: 2 Year
Height: 45mm Weight: 185g Weight limit: 125kg / 275lbs -
With pyramid receivers on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited.Warranty: 2 Year
Material: Stainless Steel Height: 60mm Product Weight: 214g Weight Limit: 125kg / 275lbs -
With pyramid receivers on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited.Warranty: 2 Year
Height: 75mm Weight: 241g Weight Limit: 125kg / 275lbs -
The Double Ended Sliding Adapter with Pyramid permits additional sliding adjustment of up to 13mm between the prosthetic socket and pyramid adapter, even as the prosthesis is being worn. The sliding adjustment allows for fine tuning in any desired parallel position of the distal portion, independent of the angle of adjustment through the pyramid.Warranty: 2 Year
Height: 60mm Product Weight: 100g Weight limit: 125kg / 275lbs -
The Dream Joint is made by ST&G to help your clients achieve a natural gait.Features:
- Plantar flexion resistance
- Dorsi-flexion assistance
- Sleek, low-profile design
- Patented one-way clutch
- Adjustable torque
- Easy fabrication
- Lightweight
- Durable stainless steel
-
The foam block is designed to be laminated into a socket, and it is typically used for two step lamination process. Socket can be bench aligned onto the foam block and can be set by using any kind of quick setting glue. Once the alignment between the socket and the foam block is set, trim the foam block as needed and prepare it for second lamination. Any 4-hole adapters with European 4-hole pattern will fit onto the foam block adapter. Warranty: 2 yearProduct Weight: 290g
Weight Limit: 136kg / 300lbs
