-
10 Degree Angled Tube Clamp, 30mm, SS -
- Energy storing K3 foot
- Good heel strike and toe off resistance
- Comes with foot shell
- Heel height is 10mm / 3/8in
-
Flexible fiberglass keel. Has 2° of dorsiflexion during swing and 15° of plantarflexion in stance. Ensures knee stability and promotes propulsion.
Max Patient Weight: 125kg/275lbs Build Height: 3.8 inches Heel Height: 10 mm (3/8 in) Foot Shell: Light, Dark (comes with foot shell pre-assembled) Activity Level: High K2-Low K3 -
Multiaxial ankle including urethane bumpers with 3 resistance options and independent spring loaded split toe for improved balance on uneven ground.
Max Patient Weight: 125kg/275lbs Build Height: Size 23-24: 2.58 in. Size 25-26: 2.65 in. Size 27-28: 2.77 in. Heel Height: 10 mm (3/8 in) Foot Shell: Light, Dark Activity Level: K2-K3 -
1222A 30mm tube clamp is available in either titanium or aluminum. It offers 5mm of offset when extra alignment is needed. It is also ideal when using a pin suspension lock, where prosthetic and pin alignment can be easily adjusted using the offset clamp. This versatile clamp design also provides an offset position that can be rotated 360 degrees. Warranty: 2 Year Product Weight: 89 grams Weight Limit: 114kg / 250lbs -
The 1752T, Adjustable Height Double Ended Adapter, Heavy Duty is to be exclusively used for the prosthetic fitting of lower extremity amputations. The Heavy Duty Adjustable Height Double Ended Adapter is used to connect any pyramid system on both ends of the receiver. The four set screws are used for anchoring the mating pyramid system as well as for making angular adjustment for alignment. The clamp screw can be loosened and the corresponding threaded tube section can be lengthened up to a maximum of 12.7mm/0.5 in from fully threaded in position. The total build height range is from 75mm to 87mm. Apply Loctite to all screws once the alignment and connection are finalized, this includes the threaded tube section to prevent rotation. Warranty: 2 Years Weight limit: 136 kg/300 lbs -
The ST&G Eclipse Pump (EP) is a removable elevated vacuum system, incorporating a fabricated space in the distal end of the socket where the pump functions similar to a distal end pad. The EP is engineered out of a medical grade silicone polymer with two valves to control the airflow. As part of a liner and sealing sleeve system, the pump is activated to push out air from the user’s weight during initial contact, and then draws in interior air to provide elevated vacuum after toe off during swing phase. The EP is available with 2 different vacuum levels to accommodate various activity levels and skin conditions.
-
The Endurance provides a combination of comfort and dynamics to users, offering natural gait with less fatigue and ultimately less strain on the lower back and sound side. The split keel and heel design enhance eversion and inversion compliance. The carbon fiber construction promotes conversion of weight bearing energy input into energy output. Beige foot shell included.
The Endurance is light-weight and has a cosmesis-friendly profile which makes it easy to cover.
-
The heavy duty foot adapter has a shorter flange providing better strength with reducing weight. The 3231T is manufactured by a forged and machined combination resulting in a strong and light weight product. A foot bolt is provided with every adapter. Warranty: 2 year Material: Titanium Product Weight: 88g Weight Limit: 170kg / 375lbs -
The 5209C carbon tube has a diameter of 34mm and length of 305mm. Warranty: 2 year Weight: 269 grams Weight Limit: 227 kg/ 500 lbs -
The heavy duty 4-ear connector provides an option for a one step lamination into a transtibial socket. The 5220T is manufactured by a forged and machined combination resulting in a strong and light weight product. Warranty: 2 year Weight: 141 grams Weight Limit: 226 kg/ 500 lbs -
The heavy duty 30mm tube clamp adapter is designed for an optimum strength while maintaining low weight. A forged and machined combination resulting in a strong and light weight product. Warranty: 2 year Weight: 128g Weight limit: 170kg / 375lbs -
The heavy duty 4-ear connector provides an option for a one step lamination into a transtibial socket. The 3230T is manufactured by a forged and machined combination resulting in a strong and light weight product. Warranty: 2 year Product Weight: 83g Weight limit: 170kg / 375lbs -
The 4-Prong AK adapter is used for lamination onto transfermoral socket. The AK Rotating Base has a new design for improved strength and alignability. This is the ideal base for flexion contracture. It has a manufactured pre-bent prong for ease of alignment and strength. The adapter provides 360 degree of rotation for pyramid adapter or pyramid receiver. This product can be used with the 1215T, 1225T/S or 1216T/S and all EZ ADAPT SERIES. Warranty: 2 year Material: Stainless Steel Product weight: 159g Weight limit: 136kg / 300lbs Torque value: M6 Cap Screw Torque: 10 Nm Hex: 5mm wrench -
With pyramid and pyramid receiver on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited. They are available in 32mm, 45mm, 60mm and 75mm height. Material: Titanium Height: 60mm Product Weight: 99g Weight Limit: 125kg / 275lbs Torque Value: M8 Set Screw Torque: 15 Nm Hex: 4mm wrench -
With pyramid and pyramid receiver on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited. They are available in 32mm, 45mm, 60mm and 75mm height.Warranty: 2 Year
Height: 75mm Weight: 188g Product weight: 125kg / 275lbs Torque value: M8 Set Screw Torque: 15 Nm Hex: 4mm wrench -
With pyramid and pyramid receiver on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited. They are available in 32mm, 45mm, 60mm and 75mm height.Warranty: 2 Year
Height: 74mm Weight: 111g Product weight: 125kg / 275lbs Torque value: M8 Set Screw Torque: 15 Nm Hex: 4mm wrench -
With pyramid and pyramid receiver on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited. They are available in 32mm, 45mm, 60mm and 75mm height. Material: Stainless steel Height: 60mm Product Weight: 166g Weight Limit: 125kg / 275lbs Torque Value: M8 Set Screw Torque: 15 Nm Hex: 4mm wrench
-
With pyramid receivers on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited.Warranty: 2 Year
Height: 32mm Product Weight: 75g Weight limit: 125kg / 275lbs -
With pyramid and pyramid receiver on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited.Warranty: 2 Year
Height: 45mm Product Weight: 121g Weight limit: 125kg / 275lbs -
Sale!
With pyramid and pyramid receiver on both ends, these titanium/stainless steel adapters provide excellent adjustability options when clearance is limited.
Warranty: 2 Year
Height: 45mm Product Weight: 86g Weight limit: 125kg / 275lbs -
This 3-Prong Pyramid Connector is used for lamination onto transfemoral socket. Warranty: 2 year Product Weight: 127g Weight Limit: 125kg / 275lbs -
The 4-Ear Connector with Rotating Receiver provides an option for a one step lamination into a transtibial socket. The 1257T consists of 1223T (4-Prong Rotating Base) and 1216T (Rotating Receiver). Warranty: 2 year Product Weight: 12g Weight Limit: 136kg / 300lbs Torque Value: M8 Set Screw (Alignment Adjustment Screw) Torque: 15 Nm Hex: 4mm Wrench -
The 1253 (3-Prong Rotating Base with Rotating Receiver) consists of 1221S (3-Prong Rotating Base) and 1216T (Rotating Receiver). Warranty: 2 year Stainless Product Weight: 184g Weight Limit: 125kg / 275lbs -
Stainless Steel 3-Prong Rotating Base with Titanium Rotating Pyramid The 1254 (3-Prong Rotating Base with Rotating Pyramid) consists of:- 1221S (3-Prong Rotating Base)
- 1215T (Rotating Pyramid).
-
The 1254S (3-Prong Rotating Base with Rotating Pyramid) consists of 1221S (3-prong rotating base) and 1225S (rotating pyramid). Warranty: 2 year Product Weight: 168g Weight Limit: 125kg / 275lbs -
The stainless steel 30mm tube clamp with pyramid is made of high strength stainless steel alloys providing a strong and durable component. Warranty: 2 year Product Weight: 105g Weight Limit: 100kg / 220lbs
