-
Sale!
*Size small in silver, on sale from stock! • Two lateral stays on each side provide lateral support • The DynamicFlex functional knitted fabric relax zone at the knee center relieves and protects flexor tendons and soft tissues • The lengthwise elastic stretch zone above the silicone pad ensures an ideal fit at all bending angles • Moisture wicking fabric and antimicrobial finish wicks perspiration away, keeping the knee cool during activity and eliminating odor • The top and bottom edges are made of extra soft snag proof material for extra comfort • Compression class II -
Sale!
This durable orthosis comfortably restricts motion of the wrist, hand and thumb. The specially formulated thermoplastic provides cast-like rigidity without the discomfort associated with traditional casting methods. It is indicated for use in post cast fracture removal, severe strains and sprains *Right small, on sale now! Extra liners on sale now for $6.00 - just add a note at check out! -
This comfortable pre-fabricated orthosis is designed for the management of mid-shaft to distal third humeral diaphyseal fractures.-
- Lightweight anatomical design provides total circumferential soft-tissue compression for optimal control of humeral segments
- Allows full range-of-motion for both the shoulder and elbow joints
- Formed of a specially formulated orthopedic grade thermoplastic
- Two cotton stockinettes are provided as an interface and act as a wicking agent
-
-
This comfortable foam-lined brace is designed for the treatment of mid-shaft and distal ulnar fractures. The clamshell design provides superior compression while allowing movement of the joints both above and below the fracture site, reducing problems associated with immobilization. Each brace comes complete with two double thickness cotton stockinettes -
This orthosis is designed for the treatment of severe strains and sprains of the wrist or early cast removal for fractures. Its cast-like rigidity provides ideal immobilization without the discomfort associated with traditional casts. A foam tongue insert ensures comfort and additional padding for the styloid process. Each brace comes complete with a double thickness cotton stockinette -
This comfortable, pre-fabricated orthosis is designed for the management of mid-shaft to distal third humeral diaphyseal fractures.-
- Features a deltoid cap extension which helps provide greater alignment control and prevents distal slippage
- Neutral design utilizes a two piece, foam lined clamshell, which provides superior compression to the fracture site
- Each brace comes complete with two double thickness cotton stockinettes
-
-
Provides stability to the wrist with limited movement. Adjustable, lightweight, durable, and comfortable. Foam pad and medical springs provide comfort and support on the palmar side. Elastic for strength, compression and breathability also provides adjustable support. -
Engineered To Exceed Your Expectations. Fabtech Systems PLUSeries™ 25 and 60-second structural urethane adhesives are a versatile and fast two part urethane system used for bonding and repairing plastics, composites, aluminum, steel, plaster and pretty much anything you can think of commonly used in the O&P manufacturing process. Since it’s a structural adhesive, it is stronger than the brittle, fracture prone acrylics commonly used in our industry today. These urethanes are so strong you can even drill and tap them! We’re confident you’ll never want to use smelly toxic acrylics again. Get More Than You Asked For. Fabtech Systems PLUSeries™ urethane adhesives are engineered to save professionals time and money while providing the best possible end result. PLUSeries™ adhesives cut out 95% of process and working times commonly associated with current acrylic adhesives. Best of all, PLUSeries™ adhesives have low to no odor and can be used anywhere in your facility. Faster. Stronger. Better. Compared to most commonly used acrylics that require time consuming preparation – Such as gathering needed materials, measuring in additives such as thickening agents and promoters, PLUSeries™ cartridge adhesives simply require adding new dispensing tips. Chosse between 25 to 60 seconds and you’re ready to go. It’s that easy! A Higher Degree of Performance and Ease. If you are tired of managing sticky, messy, smelly large cans of acrylic resin? So are we! Simply load a 50 or 220ml adhesive cartridge into the appropriate dispensing gun, twist off the cap, insert a static mixing tip and apply the adhesive where you need it with no dripping or running. -
The Dream Joint is made by ST&G to help your clients achieve a natural gait.Features:
- Plantar flexion resistance
- Dorsi-flexion assistance
- Sleek, low-profile design
- Patented one-way clutch
- Adjustable torque
- Easy fabrication
- Lightweight
- Durable stainless steel
-
Contoured 1” thick medium firm foam collar, covered with cotton stockinette. Hook and loop closure. -
Ideal for the protection and pain relief of forefoot conditions, and reducing calluses.- Made of soft elastic fibre
- Place tab between first and second toes
- Washable (air dry after washing)
- Comes in pairs
-
This versatile forefoot cover is furnished with a cushioning, extra soft Comforsil pad that translates into instant comfort for overworked metatarsal heads and a collapsed transversal arch.- Massages the met-heads and tips of your toes, giving lasting relief to sensitive feet
- Made of 100% cotton
- Hand wash and air-dry, then reuse
- Fits into any kind of shoe
- Comes in pairs
-
A variation on the silicone toe prop, the toe crest version presents with a reinforced digital loop, and addresses hammer toe conditions. The reinforcement of the loop consists of an elastic fabric woven within the silicone for added strength and durability. As with all splints that incorporate a loop, we emphasize the need for handling delicately. Comes in pairs. -
This product follows the design of more traditional elastic metatarsal band to address met head problems, both biomechanical and/or lesions.- An extra soft Comforsil disc is embedded in the plantar aspect of the elastic band to help painful metatarsals unload and diffuse pressure
- Fits snugly in any kind of shoe
-
The extra soft Comforsil Heel Spur Cushion alleviates painful calcaneal spurs, plantar fascitis, and heel related syndromes y helping support the weight load on the ankle, hip joint and sacrum. Comes in pairs -
A long lasting Comforsil heel wedge of great efficacy in cushioning downward loads upon the ankle joint, hip joint, and sacrum. For fast relief of overworked ligaments and muscle tissue, and in the treatment of symptomatic bursitis and Achilles tendonitis. Comforsil Silicone products respond to direct weight bearing pressure and show exceptional shock absorbency. Comes in pairs. -
The convenient, removable cut-out of this Comforsil Heel Spur Cushion permits the placing of the painful spur directly into the cut-out, thus completely unloading the troublesome calcaneal spur, especially in very acute cases. The device also distributes body weight away from the affected area. Comes in pairs -
A corrective shield between first and second toes, the extra soft skin-coloured Comforsil toe spreader effectively prevents deviation of the hallux into a resulting bunion, while avoiding friction. Ideal for rehabilitating the first toe after a bunionectomy. 2/pack -
Sale!
Provide comfort and relief for painful and annoying soft corns between toes. Relieves discomfort caused by overlapping toes. The agreeable density and properties of high viscosity Comforsil provide comfort and protect sensitive toes. 2 per pack -
- One lateral stay on each side provides lateral stability
- A silicone adhesive border provides a secure fit
- The DynamicFlex functional knitted fabric relax zone in the knee center relieves and protects flexor tendons and soft tissues
- Lengthwise elastic stretch zone in the lateral area of the silicone pad improves function and fit in all bending angles
- Moisture wicking fabric and antimicrobial finish wicks perspiration away, keeping the knee cool during activity and eliminating odor
- The top and bottom edges are made of extra soft snag proof material for extra comfort
- COLOURS: We have limited stock of black knee braces. Please select the colour you would like and we will contact you if it is not available.
-
The Summit™ 631 limits motion and provides effective compression for the relief of low back pain. Utilizing innovative materials and an ergonomic design, the Summit 631 contours comfortably to the vast majority of patient anatomies without compromising support. Now available in a NEW one size adjustable and the original sized versions.
-
The Summit™ 637 provides all of the features and benefits of the Summit 631 with additional profile. The Summit 637 delivers the same effective compression and limits motion, while providing additional coverage for patients in need. Rigid side panels provide additional lateral support while still maximizing comfort. Now available in a NEW one size adjustable and the original sized versions.
-
When someone suffers an episode of acute low back pain, they want relief right away. The QuikDraw™ Pro quickly restores functional mobility by providing powerful compression for immediate pain relief.With just a few sizes that correspond directly to men’s or women’s clothing sizes, the QuikDraw™ Pro will reduce inventory requirements while simplifying the fitting process. The performance characteristics of the brace result in better patient compliance. When coupled with a specific physical therapy regimen, the QuikDraw™ Pro can lead to quick and lasting pain relief for better patient outcomes. -
The Aspen Lumbar Support features a simple, elegant design with the essential elements required in a spinal brace to effectively relieve pain. Utilizing Aspen’s foundational inelastic design, elastic qualities have been incorporated for a tailored and comfortable fit. This innovative combination, coupled with Aspen’s patented compression system, provides effective low back pain relief for the active patient.
-
Like all braces manufactured by Aspen Medical Products, the NEW Evergreen™ 631 LSO HiPro delivers effective pain relief and lumbar support. This simple, low profile brace treats a variety of indications from chronic and acute pain to post operative patients. The back panel provides motion restriction, limiting flexion and extension in the lumbar spine. -
The Evergreen™ 621 SI Belt utilizes a bi-lateral pull system that provides maximum compression without the spinal rotation that can occur with a single pull tab system. The low profile and lightweight design makes extended wear comfortable while maintaining the quality of design and durability that you’ve come to expect from Aspen. -
The Aspen® “Low Profile” LSO provides immediate pain relief and comfortable support. When firmly tightened, using the LeverLatch mechanism, the brace allows patients to regain a significant degree of functional mobility and, in many cases, return to routine activities of daily living. The unique, three-piece design, featuring symmetrical side panels allows patients to tighten the brace with either hand and provides even compression throughout the tightening process.
-
The Contour™ LSO restricts motion in the lumbar spine. The brace is effective and comfortable, using the patented QuikDraw™ system with Rigid Anterior Panel (RAP) as the platform. The Contour™ LSO is modular with adjustable side and vertical panels, allowing the practitioner to fit a wide variety of patients while minimizing inventory. Specifically designed with the progression of patient care in mind, the Contour™ LSO is a multiple orthotic system, which can be stepped down to the proven QuikDraw™ RAP. -
The Contour™ TLSO by Aspen completes the QuikDraw™ Bracing System by providing superior motion restriction for the thoracic and lumbar regions of the spine. The compression of the QuikDraw™, rigidity of the Contour™ Back Panel and stability of the TLSO upgrade combine to provide the most comfortable, easy to don/doff brace on the market. The Contour TLSO completes the system by providing superior motion restriction for the thoracic and lumbar regions of the spine. The contour TLSO only comes with the SPK attachment, the shoulder attachment is available separately here. -
This pre-cut, smooth, trimmed finger splint has foam padded aluminium which is bonded to unique, cushioned, self adhering straps which cradle the finger securely. Easy to use while providing the utmost comfort and stability -
An economical thumb support with a removable, custom moldable plastic insert. Simply heat the insert in hot water, replace in the brace, and mold to the hand. The result is a custom plastic molded thumb support in a very short period of time, at a very economical price. Available in 3mm Neoprene (for warmth) or latex-free Coolcel, Ortho Active’s lightweight, latex-free, Neoprene alternative -
Similar to the 69A Neoprene Wrist Support, but with a metal thumb stay to limit thumb motion -
Similar to the 4162 but in a sleeve style. Tendon pad not included, 10” length. Body-Flex is a breathable, water-resistant material. “Thin as skin” design gives a very comfortable fit, reduces bulk and weight, and gives great durability and compression Please note, this product has been discontinued and we have limited stock available. Some sizes are sold out and will not be re-stocked. -
This comfortable Coolcel support immobilizes the thumb with a pre-formed moldable aluminum stay.- Stabilizes the MCP, CMC and IP joint
- It is easily applied using our popular lacing closure system
- Adjustable for each individual with a Velcro closure over the thumb
-
This elbow sleeve with optional tendon pad applies compression to the entire elbow area and local pressure to the muscle of the forearm. Made of Coolcel, Ortho Active’s breathable, latexfree Neoprene alternative that provides the ultimate in comfort and function. Ideal for sport use or patients susceptible to skin irritation from heat rash. -
Similar to the 3169, this splint provides stabilization of the thumb, but allows greater use of the distal phalange. The 6”, pre-formed, moldable aluminum stay ends at the IP joint, stabilizing the MCP and CMC joints. -
The Fitted Polyester Casting Ankle Sock allows practitioners to obtain molds for custom shoes, boots and ankle foot orthotic devices. Comes 10 pairs/box. Features- Reduces casting time – cure time in less then 5 minutes
- More accurate then fiberglass rolls
- Virtually eliminates all wrinkling and provides conformity to the foot and ankle contours
- Glass-smooth finish is ideal for CAD/CAM
- Cutting strip and Channel tube included for safe and innovative removal
- No toe contractures
- No need to worry about plaster clogging drains or getting on your clothing
-
Soft silicone pad that is molded to fit comfortably between toes or fingers. Hydrogel is antibacterial, hypoallergenic, and non-toxic. Facilitates proper toe or finger alignment and prevents overlapping digits. Place product between the toes or fingers with flange facing up. -
Same as the Finger Spreader but also protects against interdigital rubbing and irritation. Hydrogel is anti-bacterial, hypoallergenic, and non-toxic. Comforts between toe or finger formations such as corns or warts. Maintains alignment during healing for extended and postoperative use. Place separator so the narrowest part is between the toes/fingers and towards the foot/hand. -
Lightweight, breathable, Neoprene ankle support for comfort and stability. Universal size comes with a strap that wraps around the ankle, XS-XL sizes come as a sleeve with no strap. -
Used to ease discomfort from hammer, claw, or mallet toes.- Flexible and stretchy toe loop easily fits over toe to stay in place and is very durable
- Will not bottom out like felt or foams
- Soft vitamin enriched M-Gel slowly releases medical-grade mineral oil to soothe skin on contact
- Washable and reusable
-
These components are made of PPT and can be easily applied to insoles, orthotics or footwear to relieve pressure across the metatarsal heads. Sized to put protection and cushioning precisely where it is needed. 6 pairs per pack. -
These components are made of PPT and can be easily applied to insoles, orthotics or footwear to relieve pressure across the metatarsal heads. Sized to put protection and cushioning precisely where it is needed. 6 pairs per pack. -
These components are made of PPT and can be easily applied to insoles, orthotics or footwear to relieve pressure across the arches. Sized to put protection and cushioning precisely where it is needed. 6 pairs per pack. -
The pediatric UFO™ from Orthomerica is a comfortable, prefabricated orthosis for stretching and maintaining dorsiflexion range of motion.- Positions the foot and ankle in optimal alignment for placing stretch on the soleus while the patient is sleeping
- When used in conjunction with a knee immobilizer, this orthosis can also stretch the two-joint gastrocnemius group
-
Regular Version: Replaces spica casts and harnesses for certain congenital hip dysplasia patients. One piece, non-adjustable orthosis which holds infant in 90 degree hip flexion and 60 degree abduction. Open design facilitates diaper changes. Closed cell foam lining does not retain moisture. Adjustable Version: Offers advantages of abduction adjustment over our basic pediatric hip splint. Sturdy polypropylene frame set in 90 degree hip flexion-abduction easily adjustable 40 degrees to 180 degrees via stainless steel slotted screw assembly. -
The popular design of this AFO accommodates patients who don’t require a custom or more rigid AFO.- For flaccid foot drop indications
- Fits in most normal lace-up shoes
- Low profile for excellent cosmesis
- Can be easily trimmed and heated for a more custom fit
-
This injection-molded, carbon-reinforced polypropylene AFO has been designed to fit patients requiring an AFO for flaccid foot drop.- Lightweight, comfortable design with carbon rebound feature provides dorsiflexion
- Open heel allows it to fit in most shoes
- Padded tibial crest and dorsum straps enable accurate and secure positioning
-
Limits chronic shoulder subluxation/dislocation. Holds the humerus in position and prevents stretching of the tendons and ligaments due to poor muscle tone in the shoulder area following CVA, ligamentous rupture or peripheral nerve injury. Maintains proper position of the shoulder joint when musculature is not functioning properly. Scapular components diffuse weight of arm across shoulder girdle to minimize discomfort. Modular flexible scapular and humeral components are interchangeable for varying patient shapes and sizes. The plastic components are padded and do not touch the skin. -
The ECO Comfortably extends the thoracic spine and unweighs the wedged vertebral body in order to promote healing and pain relief.- Stabilizes the pelvis and lumbar spine to ease pain
- As simple to apply as a backpack or jacket, with easy to reach self-adjusting padded shoulder straps, and one-pull compound closure
- The metal spinal frame can be easily contoured to the patient’s thoracic and lumbar spine
- Detachable abdominal component can be used independently to provide a functional lumbar spinal orthosis
