-
Improved, industrial strength wrist stabilizer with a D-ring tension strap to stabilize weak, unstable wrists and generate warmth and to stimulate circulation. Two mouldable, aluminum stays hold the wrist in a neutral, cock-up position for proper healing. Has an adjustable thumb hole. Comes in 8” length. -
The Coolcel Infrapatellar Strap is designed to provide pain relief by increasing tension placed on the infrapatellar tendon, stabilizing the patella by reducing slack in the patellar tendon.- Available in Coolcel in black only
- Features a rubber tube buttress to concentrate corrective force
- Easy to apply and adjust tension with Velcro closure
-
The Ortho Active Hinged Knee Brace is designed to provide medial and lateral support to the knee as well as stabilize the patella. It also provides mild compression. This Coolcel version is our breathable, Neoprene alternative.- Hinges may be removed and molded to the leg to provide a custom fit
- Available with an open-top or wraparound style for easier brace application
- Available in Black
- Coolcel is latex-free
-
Similar to the 537, this Neoprene version extends further down the torso. The velcro closure is at the centre on the front of the brace and the bicep is fully adjustable for each patient. Two web/Velcro straps are included that can attach anywhere on the outside of the brace to limit shoulder motion in any desired direction. It includes a pocket on the shoulder to allow a hot/cold pack to be placed inside (hot/cold pack not included). Specify left or right. -
Comes in 5 pairs per pack or 1 pair per pack. -
Comes in 5 pairs per pack or 1 pair per pack. -
Sale!
Comes in 5 pairs per pack or 1 pair per pack. *1 pair packs, now at discounted rates! -
6mm height. Comes in 5 pairs per pack or 1 pair per pack. -
The Ortho Active Jumper’s Knee Brace is designed to provide compression, warmth, and support to the knee.- Inferior and superior straps reduce tension on the patellar tendons, thus reducing the pain associated with repetitive loading of the knee joint
- Removable patellar buttress assist in patellar tracking
- Spiral stays prevent rolling and give medial/lateral support
- This product comes in black Coolcel, a cool, breathable, latex-free material
-
Alters the biomechanics and function in the sagittal plane at the rearfoot. Available in S, M, L. May be attached under the heel area of Formthotics™ to elevate the calcaneous. Has a 3D cup around the heel, and provides approximately 8mm of raise. Helps alleviate the achilles tendon. Assists in balancing leg length discrepancy. Helps improve function in a forefoot equinus. Self-adhesive. -
Alters foot biomechanics and the triplane action of dorsiflexion, eversion and abduction at the rearfoot. Available in S, M, L. Attaches to the under-surface of Formthotics™. May be used as a medial or a lateral wedge. Has a 3D cup around the heel. Provides quick, easy alignment, and is designed for accurate integration with arch support. Minimal bulk & self-adhesive. -
An orthotic addition suitable for forefoot modification of Formthotics™. Available in S, M, L. Can be reversed to use on either lateral or medial aspect. Easy to modify, and is self-adhesive. Has a long, gentle taper. -
Provides additional support of the medial column of the foot. Available in S, M, L. Attaches under the arch of Formthotics™, and can be easily integrated with the Tri-plane wedge and the Formthotics™ “teardrop”. It is self-adhesive and offers minimal bulk. Increases midfoot inversion and stabilises excessive midfoot pronation. Utilises a softer compression-moulded EVA foam. 3D fit to medial border. -
The hardest, highest density Formthotics™ available- Greater biomechanical support right next to the foot for when the orthotic is subject to high repetitive impact
- Durable yet lightweight
- Available in XXXL size
- Colour: Red
-
The original Formthotics model. 140g/m2 Formax foam- The original Formthotics model of medium density
- Suitable for effective use in a broad range of clinical applications where management of patient biomechanics and function will improve outcome
- Single density foam leaves room for modifications and a top-cover without compromising shoe volume
- Available in youth sizes and XXXL
- Colour: Blue
-
The top seller – an excellent balance between comfort and support- Dual layer of foam has a softer, cushioning top layer and a medium density base for better compliance and comfort
- Suitable for conditions where additional cushioning is required without compromising stability or functionality
- Provides optimum patient comfort
- Available in youth sizes
- Colour: Red/Blue
-
If your patient spends long hours working and standing on hard surfaces, their feet might not be getting the support they need. Industry Formthotics™ are specifically designed to reduce shock and provide comfort, cushioning and stability so that they can get the job done with greater ease. Dual density - has a firm base and a softer top layer. -
Medial support with a lower arch profile.- Designed with a lower arch profile.
- Ideal for footwear with limited room for an arch, or patients with flat feet.
- Soft top layer improves comfort and reduces movement in shoe.
- Colour: Green/Green
-
The softest, most accommodative Formthotics™ available- Offering the greatest cushioning and flexibility in the Formthotics range
- Ideal for diabetics, or those with boney abnormalities
- Not suitable for larger people with heavy frames
- Available in youth sizes
- Colour: Beige
-
These orthotics are ideal for the active patient, helping them gain the most enjoyment and performance in their sport. People who use Active Formthotics™ report better stability, enhanced feel for the surface beneath the foot, greater warmth and comfort, and less muscle fatigue. Dual density - has a firm base and a softer top layer. -
The Edge TLSO is a rigid spinal system designed to provide maximum stability and support. The Edge TLSO restricts and controls unwanted motion while providing intracavitary pressure to unload the intervertebral discs. Ideal for geriatric and other patients who tend to suffer from skin breakdown or sores but require maximum support. Anterior height is 9" and posterior height is 14.5". -
The Edge TLSO is a rigid spinal system designed to provide maximum stability and support. The Edge TLSO restricts and controls unwanted motion while providing intracavitary pressure to unload the intervertebral discs. Ideal for geriatric and other patients who tend to suffer from skin breakdown or sores but require maximum support.
-
Lightweight, medium density foam in a contoured design with both stockinette cover and tapered ends. Hook and loop closure. Provides warmth and mild mechanical restraint to the cervical region. Comes in beige. -
This knee support features a tubular lateral “J” buttress which provides lateral patellar support. This support also has a lateral-to-medial strap and spiral side stays for added support. It is available in Neoprene (Black) or Coolcel, Ortho Active’s lightweight, latex-free Neoprene alternative. -
Sale!
Warranty: 1 year Product Detail: 2 Pin Weight Limit: 300lbs/136kg *1.5" pin size, now on sale! -
This brace is the longer version of our popular 97A design - it is 10" long. It stabilizes weak, unstable wrists and generates warmth to stimulate circulation.- Ortho Active contour distal and palmar stays are incorporated into this brace
- Stays are aluminum
- Hold the wrist in a neutral, cock-up position for proper healing
- Removable and adjustable, and provide a low profile, intimate, and comfortable fit
- The brace material is cut proximal to the palm crease to allow full hand motion while maintaining immobilization of the wrist
- Application is easy with the aid of a d-ring
- Available in Neoprene or Coolprene
- Carpal tunnel syndrome, tendonitis
- Post-cast
- Arthritic wrist
- Moderate strains or sprains
- Ortho Active contour distal and palmar stays are incorporated into this brace
-
This brace is designed to stabilize weak, unstable wrists and generate warmth to stimulate circulation.- Ortho Active Contour distal and palmer stays are incorporated into this brace
- Stays are aluminum
- Hold the wrist in a neutral, cock-up position for proper healing
- Removable and adjustable, and provide a low profile, intimate, and comfortable fit
- The brace material is cut proximal to the palm crease to allow full hand motion while maintaining immobilization of the wrist
- Application is easy with the aid of a d-ring
- Available in Neoprene or Coolprene
- Carpal tunnel syndrome, tendonitis
- Post-cast
- Arthritic wrist
- Moderate strains or sprains
- Ortho Active Contour distal and palmer stays are incorporated into this brace
-
Similar to the 100A Wrist Stabilizer, but with a pre-shaped thumb stay for thumb immobilization over latex free Neoprene padding. An effective, inexpensive thumb wrist immobilizer. Glove pull-on style with circumferential central D-ring strap for easy application. 7” length -
Improved, industrial strength, 8” wrist stabilizer with a D-ring tension strap to stabilize weak, unstable wrists and generate warmth (Neoprene) to stimulate circulation. Two moldable, aluminum stays hold the wrist in a neutral, cock-up position for proper healing. Has an adjustable thumb hole. Comes in 8” length. Available in Neoprene.
-
This plain wrist band provides warmth and low level wrist support for general discomfort. Available in 3mm Neoprene. -
This elbow sleeve has a tennis elbow strap to apply compression and warmth to the entire elbow area, as well as local pressure to the muscle of the forearm. Comes with a tendon pad. Available in black. -
This elbow sleeve has a tennis elbow strap to apply compression and warmth to the entire elbow area, as well as local pressure to the muscle of the forearm. Available in black. -
This tennis elbow strap has an adjustable Velcro closure and applies pressure to the muscle of the forearm. Made with Neoprene and available in black. -
The Hyperextension Elbow Sleeve features a three point pressure system that stops the elbow from hyperextending in the brace. Length is 12”, available in black or grey. -
Sale!
Adjustable groin strap with Velcro closure. Supports and stabilizes torn or pulled groin muscles or ligamentous attachments *Grey small, now on sale! -
This thigh wrap has a wrap-around design which is fully adjustable with a Velcro closure. It supports and stabilizes torn or pulled thigh muscles and ligamentous attachments, and can also be used as an abrasion protector for baseball players when sliding into base. -
Sale!
Designed to provide medial and lateral support to the knee, stabilize the patella and provide compression and warmth *6mm Regular Black XS - now on sale! -
Like the 32P but with two distal and proximal front Velcro straps and one central rear Velcro strap attached to the medial side hinges with hyperextension stops. 3-point design provides effective hyperextension control. Has a patella hole and universal positioning foam buttress. -
Sale!
This knee sleeve has a patella hole and three spring stays at medial/lateral aspects. *Select sizes now on sale!- Provides compression, warmth and stability which increases circulation
- Side stays provide extra stability for support of weak ligamentous structures in the knee, allowing them to function without causing further trauma
- Patella hole relieves pressure on patella
-
Sale!
This brace is the same as the 32P with the addition of diagonal straps for more stability.- Straps are made of 2” elastic and originate at the distal posterior of the knee brace, extend upward, and cross in front of the tibia, continuing circumferentially around the knee. They cross again at the back of the thigh and finish with a Velcro attachment at the proximal anterior of the brace
- By wrapping the knee with these additional straps the lateral hinges are able to provide increased stability to the medial lateral ligaments of the knee
-
The Ortho Active Hinged Knee Brace is designed to provide medial and lateral support to the knee, stabilize the patella, and provide compression and warmth.- Hinges may be removed and molded to the leg to provide a custom fit
- Available with an open-top or wraparound style for easier brace application
- Available in black or grey
-
This knee sleeve has a patella hole and a foam or donut buttress. Comes in black. -
The Active CT Lacer is the ideal choice for most patients. With an easy to use Velcro closure lacing system, the brace may be easily donned with one simple motion. The lacing system is designed so that the proximal and distal straps may be adjusted independently of one another, allowing for a proper fit for patients with unique hand and wrist sizes. This braces is designed to stabilize weak, unstable wrists. The unique Ortho Active contour dorsal and palmar stays are incorporated into this brace. These aluminum stays hold the wrist in a neutral, cock-up position for proper healing. They are removable and adjustable, and provide a low profile, intimate, and comfortable fit. The brace material is cut proximal to the palm crease to allow full hand motion while maintaining immobilization of the wrist. Comes in 6.5" length, specify left or right. Indications:- Post-cast
- Carpal Tunnel Syndrome
- Tendonitis
- Moderate strains or sprains
- Coolcel is latex-free
-
Knee sleeve with patellar hole and foam buttress. Constructed of Coolcel, Ortho Active’s lightweight, latex-free, Neoprene alternative -
This top-quality Neoprene brace is designed for mild ACL (anterior cruciate ligament) and PCL (posterior cruciate ligament) support and provides more support than our 13″ knee braces.- 16″ long – provides more leverage for the multistop hinge and excellent medial/lateral control
- Eight interlocking straps and new multistop, polycentric hinges provide superior support
-
Sale!
Stabilizes weak unstable wrists and generate warmth to stimulate circulation. Aluminum stays hold wrist in neutral, cock-up position for proper healing. Adjustable thumb hole. Aluminum stays are removable and moldable. Available in latex free Neoprene. *Black, Neoprene, XXL - now on sale! -
The Matrix line of AFOs from Trulife are made with an energy-storing composite footplate, an open calcaneal design, and a lateral strut. The foot plate can be trimmed for best fit and the padded anterior shell is height-adjustable. The carbon is warranted for one year and the softgoods for 90 days. Two tibial pads are included. Matrix Max is Trulife’s bestselling Matrix AFO. The reinforced lateral strut, made of lightweight carbon composite, provides enhanced stability. Suitable for low to high activity patients with unilateral or bilateral drop foot, as well as partial foot amputations. -
The Matrix line of AFOs from Trulife are made with an energy-storing composite footplate, an open calcaneal design, and a lateral strut. The foot plate can be trimmed for best fit and the padded anterior shell is height-adjustable. The carbon is warranted for one year and the softgoods for 90 days. Two tibial pads are included. Matrix SuperMax is the ultimate Matrix AFO, with a uniquely-designed footplate to provide greater energy reflection at toe off. The shank angle is increased to 82° to improve knee extension movement at mid stance. Suitable for low to high activity patients with unilateral or bilateral drop foot, peroneal nerve palsy, incomplete paralyses, CVA or CMT. -
The STS Slipper Sock is an exciting, innovative casting product that will benefit both you and your patients when casting for foot orthotics. With the Slipper Sock and its ultra-fast setting resin, you can now obtain a superior foot mold without the plaster mess in less than 2 minutes! You can even cast directly over nylon hosiery. Sold by the box (10 pairs). -
- The extension limit is 0 degrees
- Circular fastening straps enable the hinges to provide extra lateral stabilization to the knee joint
- Pressure reduction zones in the extremities and popliteal fossa areas improve function and fit in all bending angles
- Moisture wicking fabric and antimicrobial finish wicks perspiration away, keeping the knee cool during activity and eliminating odor
- The top and bottom edges are made of extra soft snag-proof material for extra comfort
- Compression class II
