• Wide fit for wider feet or shoes
    • Wide fit shape accommodates wider feet or wider shoes such as work boots and gumboots
    • Dual density for both firm support and cushioned comfort
    • Ideal for patients that spend time standing on hard surfaces
    • Colour: Green/Green
  • The T34 has an anatomically designed pubic pad and pelvic bar that prevent pressure spots and migration. The sternal pad swivels to eliminate pressure as well. The latch-lock clamp closure allows easy donning and doffing. The T34 is also height and width adjustable.
  • The Matrix line of AFOs from Trulife are made with an energy-storing composite footplate, an open calcaneal design, and a lateral strut. The foot plate can be trimmed for best fit and the padded anterior shell is height-adjustable. The carbon is warranted for one year and the softgoods for 90 days. Two tibial pads are included. Matrix SuperMax is the ultimate Matrix AFO, with a uniquely-designed footplate to provide greater energy reflection at toe off. The shank angle is increased to 82° to improve knee extension movement at mid stance. Suitable for low to high activity patients with unilateral or bilateral drop foot, peroneal nerve palsy, incomplete paralyses, CVA or CMT.
  • The Matrix line of AFOs from Trulife are made with an energy-storing composite footplate, an open calcaneal design, and a lateral strut. The foot plate can be trimmed for best fit and the padded anterior shell is height-adjustable. The carbon is warranted for one year and the softgoods for 90 days. Two tibial pads are included. Matrix Max is Trulife’s bestselling Matrix AFO. The reinforced lateral strut, made of lightweight carbon composite, provides enhanced stability. Suitable for low to high activity patients with unilateral or bilateral drop foot, as well as partial foot amputations.
  • Alters foot biomechanics and the triplane action of dorsiflexion, eversion and abduction at the rearfoot. Available in S, M, L. Attaches to the under-surface of Formthotics™. May be used as a medial or a lateral wedge. Has a 3D cup around the heel. Provides quick, easy alignment, and is designed for accurate integration with arch support. Minimal bulk & self-adhesive.
  • The STS Slipper Sock is an exciting, innovative casting product that will benefit both you and your patients when casting for foot orthotics. With the Slipper Sock and its ultra-fast setting resin, you can now obtain a superior foot mold without the plaster mess in less than 2 minutes! You can even cast directly over nylon hosiery. Sold by the box (10 pairs).
  • The Fitted Polyester Casting Ankle Sock allows practitioners to obtain molds for custom shoes, boots and ankle foot orthotic devices. Comes 10 pairs/box. Features
    • Reduces casting time – cure time in less then 5 minutes
    • More accurate then fiberglass rolls
    • Virtually eliminates all wrinkling and provides conformity to the foot and ankle contours
    • Glass-smooth finish is ideal for CAD/CAM
    • Cutting strip and Channel tube included for safe and innovative removal
    • No toe contractures
    • No need to worry about plaster clogging drains or getting on your clothing
  • Sale!
    *Size small in silver, on sale from stock! • Two lateral stays on each side provide lateral support • The DynamicFlex functional knitted fabric relax zone at the knee center relieves and protects flexor tendons and soft tissues • The lengthwise elastic stretch zone above the silicone pad ensures an ideal fit at all bending angles • Moisture wicking fabric and antimicrobial finish wicks perspiration away, keeping the knee cool during activity and eliminating odor • The top and bottom edges are made of extra soft snag proof material for extra comfort • Compression class II
    • The extension limit is 0 degrees
    • Circular fastening straps enable the hinges to provide extra lateral stabilization to the knee joint
    • Pressure reduction zones in the extremities and popliteal fossa areas improve function and fit in all bending angles
    • Moisture wicking fabric and antimicrobial finish wicks perspiration away, keeping the knee cool during activity and eliminating odor
    • The top and bottom edges are made of extra soft snag-proof material for extra comfort
    • Compression class II
  • A unique slim shape
    • Unique slim shape helps to achieve a perfect fit into slim fitting sports shoes
    • Dual density for comfort
    • Forefoot is perforated for increased airflow to help keep the feet cool and dry
    • Available sizes: XS - XXL
    • Colour: Green/Green
  • Sale!
    This durable orthosis comfortably restricts motion of the wrist, hand and thumb. The specially formulated thermoplastic provides cast-like rigidity without the discomfort associated with traditional casting methods. It is indicated for use in post cast fracture removal, severe strains and sprains *Right small, on sale now! Extra liners on sale now for $6.00 - just add a note at check out!
  • This orthosis is designed for the treatment of severe strains and sprains of the wrist or early cast removal for fractures. Its cast-like rigidity provides ideal immobilization without the discomfort associated with traditional casts. A foam tongue insert ensures comfort and additional padding for the styloid process. Each brace comes complete with a double thickness cotton stockinette
  • This comfortable foam-lined brace is designed for the treatment of mid-shaft and distal ulnar fractures. The clamshell design provides superior compression while allowing movement of the joints both above and below the fracture site, reducing problems associated with immobilization. Each brace comes complete with two double thickness cotton stockinettes
  • Sale!
    This lightweight AFO is designed to assist ambulation for those patients suffering from mild to moderate neurological deficit, resulting in drop-foot. The anatomically correct shape will fit inside most lace-up shoes. It is fabricated from specially-formed, orthopedic-grade thermoplastic, and offers durable, long-term performance and reliability. For a more comfortable individual fit, the orthosis may be custom trimmed and reshaped using cast scissors and a heat gun. *Right XL, on sale now!
  • This comfortable pre-fabricated orthosis is designed for the management of mid-shaft to distal third humeral diaphyseal fractures.
      • Lightweight anatomical design provides total circumferential soft-tissue compression for optimal control of humeral segments
      • Allows full range-of-motion for both the shoulder and elbow joints
      • Formed of a specially formulated orthopedic grade thermoplastic
      • Two cotton stockinettes are provided as an interface and act as a wicking agent
    </ul
  • This comfortable, pre-fabricated orthosis is designed for the management of mid-shaft to distal third humeral diaphyseal fractures.
      • Features a deltoid cap extension which helps provide greater alignment control and prevents distal slippage
      • Neutral design utilizes a two piece, foam lined clamshell, which provides superior compression to the fracture site
      • Each brace comes complete with two double thickness cotton stockinettes
    </ul
  • An orthotic addition suitable for forefoot modification of Formthotics™. Available in S, M, L. Can be reversed to use on either lateral or medial aspect. Easy to modify, and is self-adhesive. Has a long, gentle taper.
  • Provides additional support of the medial column of the foot. Available in S, M, L. Attaches under the arch of Formthotics™, and can be easily integrated with the Tri-plane wedge and the Formthotics™ “teardrop”. It is self-adhesive and offers minimal bulk. Increases midfoot inversion and stabilises excessive midfoot pronation. Utilises a softer compression-moulded EVA foam. 3D fit to medial border.
  • Decreasing muscle strength, balance and proprioception issues increase the risk of falls while aging. Wearing protective shorts allows older people to reduce the risk of hip fracture during ambulation so they can stay active, exercise and further reduce the risk of falls.

    These are breathable cotton/poly shorts with a pair of shock absorbing, high density, contour design EVA pads. The pads are specially designed for shock absorption and impact resistance at both trochanter regions for prevention of hip fractures due to falls. The drawstring is provided for people with a particularly small waist, but for most users it is not necessary and can be removed. The pads are removable for washing the shorts.

  • Canadian health authorities have recommended the use of face masks to help prevent the spread of COVID-19.

    We've made our popular cloth masks available for resale in attractive retail packaging. 1 mask per pack. Masks are not returnable due to health and safety reasons. Features:
    • We have redesigned these mask to include a built-in filter layer. The filter is meltblown surgical mask filtration fabric that has a filtration efficiency of 95%, and it is sewn into the mask. There is no longer a slot to insert your own filter.
    • The mask still features an inside and outside layer of 100% cotton
    • Has thin but durable elastic that goes around the ears
    • Has a bendable metal nose piece that allows you to fit the top of the mask to your face, ensuring air passes through the fabric instead of escaping out the top of the mask
  • These components are made of PPT and can be easily applied to insoles, orthotics or footwear to relieve pressure across the metatarsal heads. Sized to put protection and cushioning precisely where it is needed. 6 pairs per pack.
  • These components are made of PPT and can be easily applied to insoles, orthotics or footwear to relieve pressure across the metatarsal heads. Sized to put protection and cushioning precisely where it is needed. 6 pairs per pack.
  • These components are made of PPT and can be easily applied to insoles, orthotics or footwear to relieve pressure across the arches. Sized to put protection and cushioning precisely where it is needed. 6 pairs per pack.
  • Adjustable, discreet lumbosacral stabilization and abdominal support Antibacterial Trutex fabric promotes freshness Breathable stretch foam Available with or without low temperature, heat mouldable, rigid back support Indications: Low back sprains/strains, mild lumbar disc injury
  • The P97 Pediatric Contoured Wrist Support is designed to provide warmth, compression, and stability to the affected wrist. The stays are anatomically contoured to provide a low profile fit that does not impede use of the hand or fingers. Specify left or right. Available in retail packaging.
  • Sale!
    This vest-style Pediatric Front Closure Posture Corrector is designed to hold the shoulders in a neutral position, limiting forward rotation of the shoulders for natural healing. The contoured shoulder straps are shaped for maximum support and comfort under the arms. The posterior crossing straps provide maximum support to hold the shoulders back. The front closure waist belt makes this support very easy to put on with no need for help from others, like more traditional clavicle straps.
  • This cervical collar is made of breathable, high quality foam padding to immobilize and support the neck as it heals. Soft, lightweight, and easy to wear. Has a slight contour to comfortably fit under the chin. Comes in 6cm and 8cm widths.
  • The Pediatric Jumper’s Knee Brace is designed to provide compression, warmth, and support to the knee. The inferior and superior straps reduce tension on the patellar tendons, thus reducing the pain associated with repetitive loading of the knee joint.
  • The P32 Pediatric Hinged Knee Brace is designed to provide medial and lateral support to the knee, stabilize the patella, and provide compression and warmth. The hinges may be removed and molded to the leg to provide a custom fit. Available in retail packaging.
  • The Pediatric Arm Sling is made of soft poly-cotton and features a fun dinosaur print. The shoulder strap adjusts with a slide buckle, and the hook and loop closure allows for a customized fit. Available in retail packaging.
  • Extremely lightweight aluminium, functional shoulder abduction splint. Especially effective following rotator cuff repairs, involved humeral fractures, and post-op shoulder/arm surgery where control of shoulder position and elbow flexion is desired.
    • Universal design fits right or left
    • Replacement pads available (product #11153-01)
  • Comfortable, low profile prefabricated leaf spring design to correct flaccid foot drop, especially on post-stroke patients. Injection molded polypropylene allows for different thicknesses throughout the orthosis - thicker on the vertical aspect for rigidity, thinner footplate for ease of trimming, comfort and flexibility.
  • This modular arm orthosis is effective for post surgical and post injury indications where limited range of motion and rotation control is desired. Comes with an upper arm component and a wrist/hand module to control rotation.
    • Trimmable, lightweight polyethylene
    • Anodized, lightweight aluminum joint on the lateral side allows positive lock, flexion and extension in 30 degree increments
    • Adjustable Velcro straps allow for adjustable compression, wound inspection, dressing and sock changes
    • Universal design to fit either left or right elbow
    • Perforated upper and lower arm components
    • Padded sling for post-op comfort and patient confidence included
  • The pediatric UFO™ from Orthomerica is a comfortable, prefabricated orthosis for stretching and maintaining dorsiflexion range of motion.
    • Positions the foot and ankle in optimal alignment for placing stretch on the soleus while the patient is sleeping
    • When used in conjunction with a knee immobilizer, this orthosis can also stretch the two-joint gastrocnemius group
  • Regular Version: Replaces spica casts and harnesses for certain congenital hip dysplasia patients. One piece, non-adjustable orthosis which holds infant in 90 degree hip flexion and 60 degree abduction. Open design facilitates diaper changes. Closed cell foam lining does not retain moisture. Adjustable Version: Offers advantages of abduction adjustment over our basic pediatric hip splint. Sturdy polypropylene frame set in 90 degree hip flexion-abduction easily adjustable 40 degrees to 180 degrees via stainless steel slotted screw assembly.
  • The popular design of this AFO accommodates patients who don’t require a custom or more rigid AFO.
    • For flaccid foot drop indications
    • Fits in most normal lace-up shoes
    • Low profile for excellent cosmesis
    • Can be easily trimmed and heated for a more custom fit
  • Limits chronic shoulder subluxation/dislocation. Holds the humerus in position and prevents stretching of the tendons and ligaments due to poor muscle tone in the shoulder area following CVA, ligamentous rupture or peripheral nerve injury. Maintains proper position of the shoulder joint when musculature is not functioning properly. Scapular components diffuse weight of arm across shoulder girdle to minimize discomfort. Modular flexible scapular and humeral components are interchangeable for varying patient shapes and sizes. The plastic components are padded and do not touch the skin.
  • Effective in limiting flexion/extension following elbow arthroplasty, surgery or injury when limited range of motion is desired.
    • Lightweight, perforated polyethylene with a closed cell foam lining
    • Universal design to fit either left or right elbow
    • Socks included with each orthosis
  • Kydex® Cock-Up Splint maintains wrist and hand in slight extension. Excellent for a variety of wrist and hand indications such as arthritic hand positioning, reconstructive surgery or spasticity. The platform extends to the end of the fingers. Kydex material can be heat modified and/or trimmed. Specify right or left.
  • This injection-molded, carbon-reinforced polypropylene AFO has been designed to fit patients requiring an AFO for flaccid foot drop.
    • Lightweight, comfortable design with carbon rebound feature provides dorsiflexion
    • Open heel allows it to fit in most shoes
    • Padded tibial crest and dorsum straps enable accurate and secure positioning
  • The California Low Profile Orthosis is a totally modular spinal system that provides stability and abdominal support without compromising respiration or interfering with activities of daily living. The compound closure system is adjustable for both circumference and waist/hip development. This orthosis is symmetrically shaped and represents a solution to one of the most difficult problems in spinal bracing—superior migration. Posterior component is 9” high. Indications Acute and chronic low back pain, post-operative support, and activity-related low back pain. This brace is effective for patients who have problems tolerating xiphoid-height spinal systems, e.g., obese patients, those with a short stature, women in late pregnancy and patients with respiratory problems.
  • The ECO Comfortably extends the thoracic spine and unweighs the wedged vertebral body in order to promote healing and pain relief.
    • Stabilizes the pelvis and lumbar spine to ease pain
    • As simple to apply as a backpack or jacket, with easy to reach self-adjusting padded shoulder straps, and one-pull compound closure
    • The metal spinal frame can be easily contoured to the patient’s thoracic and lumbar spine
    • Detachable abdominal component can be used independently to provide a functional lumbar spinal orthosis
  • The softest, most accommodative Formthotics™ available
    • Offering the greatest cushioning and flexibility in the Formthotics range
    • Ideal for diabetics, or those with boney abnormalities
    • Not suitable for larger people with heavy frames
    • Available in youth sizes
    • Colour: Beige
  • Mild functional support with maximum cushioning and comfort
    • Suitable for the elderly, diabetic and arthritic patients, or those with rigid or sensitive feet
    • Not suitable for larger people with heavy frames
    • Colour: Burgundy
  • The original Formthotics model. 140g/m2 Formax foam
    • The original Formthotics model of medium density
    • Suitable for effective use in a broad range of clinical applications where management of patient biomechanics and function will improve outcome
    • Single density foam leaves room for modifications and a top-cover without compromising shoe volume
    • Available in youth sizes and XXXL
    • Colour: Blue
  • The hardest, highest density Formthotics™ available
    • Greater biomechanical support right next to the foot for when the orthotic is subject to high repetitive impact
    • Durable yet lightweight
    • Available in XXXL size
    • Colour: Red
  • Seamless, supportive intermediate density
    • Colour will blend seamlessly into most business and sports footwear
    • Lightweight and durable enough to wear everyday
    • Colour: Black

Title

Go to Top