-
Sale!
*Sizes 18, 19, and 25 are on sale! This metatarsal bandage is effective for treating splayfoot. Supports and lifts the transverse arch of the metatarsal bones. Comes in pairs. Sizing: Forefoot circumference (in cm) -
Freedom offers a variety of cosmetic foot shells. Most products can be provided with a Generation 3 foot shell with a Cosmetic Attachment Plate (CAP), or a sandal toe foot shell (the foot module must also be ordered in a sandal toe configuration). Check the Foot Shell Ordering Guide for more information on which foot shells are available for each foot. Quick tips for ordering:- If you are placing an order for a foot, please indicate whether you would like a foot shell as well on the foot product page, no need to add the foot shell as a separate item on your order
-
Sale!
These prefabricated insoles from Birkenstock have a gentle longitudinal and transversal arch. These are the wide insoles, available in adult and children's sizes. *Size 27, on sale now! -
- Arrives ready to install
- Natural looking, sandal toe foot shell
- Pyramid and spacer can be removed for Symes patient application
-
- Lightweight
- One standard Delrin keel per foot size
- Propels amputee through cadence
- Natural looking Lightfoot Foot Shell available in both light and dark
-
Time Tested Stability and Dynamics The Highlander provides active patients with long residual limbs an efficient and smooth gait, with excellent energy return. A split toe provides excellent inversion-eversion, allowing users to walk and run with confidence on uneven terrain. The Highlander can be used with exoskeletal systems or users weighing up to 500 lbs. As a result, amputees once limited to lower functioning products can now enjoy the benefits provided by a premium energy storage and return device so they can walk farther, faster, longer. Highlander MAX The Highlander MAX is a custom order foot, available for impact level 10-12 users weighing between 131-226 kg (286-500 lbs). Overview:- Engineered for active amputees with long residual limbs
- Split toe provides excellent inversion-eversion
- Offers ideal blend of stability and action, often preferred by transfemoral amputees
- Custom Highlander MAX rated to 500 lbs
Weight (lb) Impact Level Weight (kg) Low Moderate High 286-325 10 131-147 326-365 10 11 148-166 366-420 10 167-190 421-480 11 191-218 480-500 12 219-227 -
The Endurance provides a combination of comfort and dynamics to users, offering natural gait with less fatigue and ultimately less strain on the lower back and sound side. The split keel and heel design enhance eversion and inversion compliance. The carbon fiber construction promotes conversion of weight bearing energy input into energy output. Beige foot shell included.
The Endurance is light-weight and has a cosmesis-friendly profile which makes it easy to cover.
-
- All the benefits of the Kinetic Light with the addition of a removable, sandal toe foot shell and a more lively keel
- Low profile composite keel with multi-axial ankle
- Male pyramid attachment
- Ideal for patients on the edge of advancing to a K3 product
-
- Dynamic toe and cushioned heel response
- Full length, split composite keel for increased stability
- Removable, life-like, sandal-toe foot shell
- Pre-assembled with male pyramid for easy installation
- Pyramid and spacer can be removed for Symes patient application
-
Stay Grounded. Feel Connected. Freedom Kinnex integrates the world’s fastest responding microprocessor ankle/foot technology and carbon fiber to provide low – to moderate impact K3 ambulators the stability they expect – instantly. Unmatched ground compliance, improved comfort, and automated heel height adjustments keep users firmly grounded and connected, wet or dry. Designed for low to moderate K3 level ambulators that require unsurpassed ground compliance for everyday activities. With 30 degrees of microprocessor controlled motion, 20° plantar and 10° dorsi, Kinnex allows the prosthetic user to navigate environmental obstacles such as: ramps, slopes, uneven terrain, and stairs with added confidence and stability. This motion also reduces internal socket pressures and improves the comfort when sitting, squatting or standing. Overview: • Microprocessor controlled resistance to optimize stability on varied terrain, and changes in cadence • With 30 degrees of microprocessor controlled motion, 20° plantar and 10° dorsi, kinnex allows the prosthetic user to navigate environmental obstacles such as: ramps, slopes, uneven terrain, and stairs with added confidence and stability. This motion also reduces internal socket pressures and improves the comfort when sitting, squatting or standing • Manual lock: allows for convenient and quick lock out the ankle for driving or certain activities • IP67 rating for immersion in fresh water for up to 30 min at a depth of 3 feet • Heel height adjustments up to 2 inches Feel Connected • Kinnex GaitLab App for prosthetist use to set up the patient using a smart phone device • Kinnex Patient App for the user to monitor battery status, make heel adjustments, select shoes and fine tune performance and comfort settings Specs: User Weight Ratings: 125kg (275 lbs.) Build Height: 7.2″ / 184mm – 7.4″ / 186mm (dependent on foot size) Average Product Weight: 3.281bs / 1.49kg (without footshell) Battery Life: 24 hours No Power Default Mode: Manual Lock Charging Time: 3 hours Connector: Male Pyramid Warranty Foot Module 36 months, cosmetic foot shell 6 months Water Resistance: IP67, safe for occasional submersion in water for up to 30 minutes to a depth of 3ft (1m) Category Selection ChartWeight (lb) Impact Level Weight (kg) Low Moderate 100-115 1 1 44-52 116-130 1 2 53-59 131-150 2 3 60-68 151-170 3 4 69-77 171-195 4 5 78-88 196-220 5 6 89-100 221-255 6 7 101-116 256-275 7 117-130 -
- Energy storing K3 foot
- Good heel strike and toe off resistance
- Comes with foot shell
- Heel height is 10mm / 3/8in
-
REDEFINING THE ANKLE EXPERIENCE
The time-tested hydraulic ankle that continues to raise the bar for quality, stability, range of motion, and comfort. Experience the highest level of satisfaction with the redesigned Kinterra hydraulic ankle. Thoughtfully designed to meet more daily needs and to exceed all performance expectations. Redefining movement for life. NEW 3.0 DESIGN 20% increase in user weight rating - Industry-leading weight rating supporting users up to 330 lbs without increasing product weight. Tested to over 3 million cycles at a 330lbs/150 kg load. 42% expansion of ROM - Energy return and socket comfort without sacrificing stability The Kinterra Difference - Foot Features- Consistent performance - Improved valve design for larger range of PF/DF resistance adjustments, smoother hydraulic movement, and temperature compensation for consistent performance
- Lasting reliability - Hinge pin diameter increased for improved fatigue resistance
- Seamless movement - Redesigned EnduraCore footplate for energy return and a smooth rollover. A split keel and heel provide mediolateral stability and terrain adaptation
- Increased compatibility - Redesigned pyramid and collar shape for a decreased build height and increased reliability
- Comfort and stability - Clinically optimal hydraulic ankle ROM for energy return and terrain adaptation during ambulation, and improved socket comfort during sitting, without sacrificing stability.
- 17° hydraulic ankle articulation - 15° of plantarflexion and 2° of dorsiflexion allow the foot to reach and maintain footflat across differing terrains and improved socket comfort while sitting
- Change shoes without adjustment - Accommodates moderate changes in heel height without adjustment
- Submersible in fresh water up to 1 metre for 30 minutes
- Improved dorsiflexion assist spring - Returns the ankle to 2°DF when unweighted, decreasing risk of toe catching during ambulation
-
Flexible fiberglass keel. Has 2° of dorsiflexion during swing and 15° of plantarflexion in stance. Ensures knee stability and promotes propulsion.
Max Patient Weight: 125kg/275lbs Build Height: 3.8 inches Heel Height: 10 mm (3/8 in) Foot Shell: Light, Dark (comes with foot shell pre-assembled) Activity Level: High K2-Low K3 -
Multiaxial ankle including urethane bumpers with 3 resistance options and independent spring loaded split toe for improved balance on uneven ground.
Max Patient Weight: 125kg/275lbs Build Height: Size 23-24: 2.58 in. Size 25-26: 2.65 in. Size 27-28: 2.77 in. Heel Height: 10 mm (3/8 in) Foot Shell: Light, Dark Activity Level: K2-K3 -
- Dynamic response
- Smooth rollover and controlled plantar flexion
- Flexible shank provides axial rotation and multi-axial articulation
- Dynamic full length composite keel, split for compliance and stability on uneven surfaces
- Optional toe wedges are provided to increase dorsiflexion resistance and mid-stance stability
- Similar to the Triumph, but a lighter foot
-
- Easy rollover
- Lightweight
-
- K2 impact level
- Integrated multi-axial ankle
- Proximal female pyramid
- Full length, composite keel
- Sandal toe foot shell (non-removable)
-
• Trulife’s heavy-duty foot withstands up to 450 lb! • Durable composite design for K3 users • Pre-assembled with a male pyramid for quick and easy installation • Split composite keel for increased stability • Dynamic toe and cushioned heel response • Removable, life-like, sandal-toe foot shellIndications:
Low to medium impact levels, K3, maximum weight of 205 kg /450 lb* -
- Low profile foot for long residual limb
- Multi-axial
- C-shape replicates true, anatomical plantar flexion
- Full length, split, composite keel for stability on uneven surfaces
- Removable foot shell
-
- K2 foot with integrated multi-axial ankle
- Proximal male pyramid
- Full length, composite keel
- Sandal toe foot shell (non-removable)
- Integrated ankle function for all categories is the same as the existing Kinetic
-
- Multi axial ankle motion
- Variable ankle motion resistance
- Pyramid version for ankle joint
- K2 / K3 activity level foot
- Sizes: 22 – 27
- Weight 220 or 275 lbs
-
- High-tech performance with simplicity
- Optimum flexibility and toe response
- Pyramid adapter included
- Flexible keel for K2 activity
- Soft Heel Cushion with smooth rollovers
- Product Weight 579g
- Build Height 83mm / 3.27in
