-
Available for sale individually or with Ultraflex custom fabricated orthoses made in the Ultraflex lab. Ultraflex toe pads are an ideal addition for neurologically involved patients. Recommended for use with the Ultraflex Adjustable Dynamic Response UltraSafeGait for managing gait deviations. -
The ONE solution for all your rehab needs. The Ultraflex ONE is a breakthrough technology that provides protection, stability, functional assist and low load prolonged stress (LLPS) in ONE family of advanced orthoses. This joint can be used in the fabrication of custom ankle, knee, wrist and elbow orthoses for the treatment of neurological spasticity and orthopedic rehabilitation - these orthoses are considered therapeutic and are not designed for ambulation. There is one joint per package, and companion joints can be purchased separately here. The alignment jig for the ONE joint can be purchased here. -
Companion joint for Ultraflex ONE joint. This joint has range of motion stops at 20 and 80 degrees. Companion joint with t-stirrup also available. -
This joint can be used in the fabrication of custom ankle orthoses to address gait deviation, muscle and joint weakness, and instability, increasing mobility. These orthoses are considered definitive and are not designed for stretching. Ordering Information: Comes individually, specify left or right. For patients weighing up to 220 lb. Use two joints per ankle for patients weighing more than 150 lbs. The left joint can be used for the lateral side of left ankle or the medial side of the right ankle. The right joint can be used for the lateral side of the right ankle or the medial side of the left ankle. For a patient weighing less than 150 lbs the left joint would be used for the lateral side of the left ankle and the right joint would be used for the lateral side of the right ankle. In that case Ultraflex recommends using a companion ROM joint item AFOP-ROM for the medial side of the brace. Details:- Features an enhanced design: 40% lighter and 30% smaller than the original USS AFO joint
- Weight: .40 lb
- Envelope Size: 4.625x3.863x.488” each
- Supports a person who is up to 220 lbs (medial and lateral joints together)
- Continually adjustable 0-40º plantarflexion and 0-40º dorsiflexion ROM
- Adjustable dampening muscle compensation: plantarflexion up to 240 in*lb, dorsiflexion up to 360 in*lb
- Dynamic, adjustable shock absorption at initial contact and through gait with return hysteresis
-
-
This joint can be used in the fabrication of custom wrist orthoses for orthopedic rehabilitation and neurological spasticity treatment through low load stretching. These orthoses are considered therapeutic and are not designed for ambulation. Comes in pairs (power unit and companion). Power Joint- Joints are bi-directional; continuously adjustable range is ± 140º or 280º total
- Safety and therapeutic range lock in 20º increments
- Don-doff lock at any position within 280º
- Integrated dynamic bi-directional (extension/flexion) power assists rated to 7.5 Nm (66 in·lb) 85D power units
- Mass (weight) with full struts: Knee/Elbow- 165g. (6 oz.), Ankle/Wrist- 75g. (2.5 oz.)
- Joints are bi-directional; range is ± 140º or 280º total
- Safety and therapeutic range block in 20º increments
- Mass (weight) with full struts: Knee/Elbow-90g. (3 oz.), Ankle/Wrist-75g. (2.5 oz.)
-
This joint can be used in the fabrication of custom ankle orthoses to address gait deviation, muscle and joint weakness, and instability, increasing mobility. These orthoses are considered definitive and are not designed for stretching. Designed for pediatric/adolescent patients up to 110 lbs. Ordering Information: Comes individually, specify left or right. Use two joints per ankle for patients weighing more than 50 lbs. The left joint can be used for the lateral side of left ankle or the medial side of the right ankle. The right joint can be used for the lateral side of the right ankle or the medial side of the left ankle. For a patient weighing less than 50 lbs the left joint would be used for the lateral side of the left ankle and the right joint would be used for the lateral side of the right ankle. In that case Ultraflex recommends using a companion ROM joint item AFOP-ROM for the medial side of the brace. Features:Adjustable muscle augmentation: ADR elastomer technology fine-tunes first, second and third rockers. Compression of the posterior channel augments the tibialis anterior in early to mid stance.- Compression of the anterior channel augments the gastroc-soleus in mid to late stance. Changing the restraint level is accomplished with simple set screw adjustments. Orthotists can make further refinements as dictated by patient presentation by adjusting elastomer length.
- Unrestricted motion: Ultraflex ADR restrains range of motion, but does not hold it or stop it, offering increased ROM stability. The plantarflexion or dorsiflexion stop can be used to create a rigid stop when dynamic restraint is not adequate.
- Customized stability in stance: ADR selectively augments and provides support for the tibialis anterior and gastroc-soleous muscles and alters their response to ground reaction forces (GRF) as needed; 0-140 inches/lb of torque restraint for plantarflexion and dorsiflexion. Dual medial and lateral stirrups support the mid-foot and transfer GRF to the toe lever. The custom interface provides support specific to the patient presentation.
- Smooth/natural roll-over: adjustable range of motion, plantarflexion and dorisflexion range from 0-40º; ADR allows for improved knee-ankle-foot biomechanics with stabilized ROM. ADR may maximize speed at a reduced energy cost.
- Clearance in swing: ADR provides sufficient force to restrain GRF, returns the ankle to neutral, and assists foot clearance during swing.
-
-
The Ultraflex Universal Joint uses a tried and true clevis design for maximum M-L strength, yet is extremely lightweight and low profile. It is comparatively smaller, lighter, and stronger.- Can be used on ankles, elbows, or wrists as well as for both adult and pediatric applications
- Recommended for use as a companion joint to Ultraflex ADR™
- Joint dummies included
-
For use with the Ultraflex AFO SS1T & SS2T. -
Materials: Joint: 1/2”x .09” (12.5 x 2mm) 2024T3 aluminum Non-corrosive coating: epoxy e-coating Adjustment screws and pivot: stainless steel Features: Lightweight unit – 1.3oz (37g) Use to define any range between -50 to 50º Short center section – bends closely from joint to shell -
This joint can be used in the fabrication of custom orthoses for orthopedic rehabilitation and neurological spasticity treatment through low load stretching. These orthoses are considered therapeutic and are not designed for ambulation. Comes individually, specify left or right. Range: -75 to ±75 degrees Block ankle motion at 7.5 degree increments Don-doff lock at any position at 7.5 degree increments Removable power assists available (45, 60 and 90 lbs) Weight: 119 grams per side (without bars or stirrup) Stirrup kit included Materials Joints: Stainless steel Sidebars: 5/8″ x 3/16″ (16×4.8 mm) 2024 aluminum, 12″ proximal bars Stirrup: 1/2″ x 1/8″ (12.5 x 3 mm) 2024 aluminum Non-corrosive coating: epoxy powder coating on bars and stirrups, black flouropolymer on joints Test Data M-L strength: 360 lb (160 kg) AP strength: 500 lb (225 kg) Number of cycles: 1 million For use with the Ankle Joint Power Unit. -
This joint can be used in the fabrication of custom orthoses for orthopedic rehabilitation and neurological spasticity treatment through low load stretching. These orthoses are considered therapeutic and are not designed for ambulation. Comes individually, specify left or right. Range: -75 to ±75 degrees Block ankle motion at 7.5 degree increments Don-doff lock at any position at 7.5 degree increments Removable power assists available (45, 60 and 90 lbs) Weight: 119 grams per side (without bars and stirrups) Materials Joints: Stainless steel Sidebars: 5/8″ x 3/16″ (16×4.8 mm) 2024 aluminum, 12″ proximal bars Stirrup: 1/2″ x 1/8″ (12.5 x 3 mm) 2024 aluminum Non-corrosive coating: epoxy powder coating on bars and stirrups, black flouropolymer on joints Test Data M-L strength: 360 lb (160 kg) AP strength: 500+ lb (225 kg) Lock strength: 155 lb (70kg) Number of cycles: 1 million+ For use with the T-Stirrup Ankle Joint Power Unit. -
This joint can be used in the fabrication of custom wrist orthoses for orthopedic rehabilitation and neurological spasticity treatment through low load stretching. These orthoses are considered therapeutic and are not designed for ambulation. Comes in pairs (power unit and companion). Power Joint- Joints are bi-directional; continuously adjustable range is ± 140º or 280º total
- Safety and therapeutic range lock in 20º increments
- Don-doff lock at any position within 280º
- Integrated dynamic bi-directional (extension/flexion) power assists rated to 10.2 Nm (90 in·lb) 85D power units
- Mass (weight) with full struts: Knee/Elbow- 290g. (6 oz.) Ankle/Wrist- 250g. (2.5 oz.)
- Joints are bi-directional; range is ± 140º or 280º total
- Safety and therapeutic range block in 20º increments
- Mass (weight) with full struts: Knee/Elbow – 210g. (7.5 oz.), Ankle/Wrist -170g. (6 oz.)
