- Articulating, adjustable pelvic band
- Posterior pad may be used horizontally or vertically
- Swivel sternal pad for patient comfort
- Latch-lock clamp closure allows ease of donning and doffing
- Available in regular or short
- M/L and height adjustable
- Pads are removable and washable
- Also known as a "jewett brace"
-
-
Compresses and stabilizes lumbar, sacral and abdominal regions Posterior plasticized flexible spring steel stays maintain shape and provide additional support Conforms to patient’s anatomical shape for optimal fit Indications: Nonspecific lower back pain, moderate lumbar strain, moderate lumbar sprain; ideal for shorter torsos -
Compresses and stabilizes lumbar, sacral and abdominal regions Posterior plasticized flexible spring steel stays maintain shape and provide additional support Conforms to patient’s anatomical shape for optimal fit Indications: Nonspecific lower back pain, moderate lumbar strain, moderate lumbar sprain -
This CTO was designed to support and stabilize the cervical spine and upper thoracic spine after injury or surgery. For C2 to T3 stable fractures, muscular/ligamentous injury, degenerative joint disease, cervical pain, and nerve impingement. Incudes two pad sets. -
Compression and stabilization of thoracic, lumbar, sacral and abdominal regions Cross-over straps attach in front and distribute pressure evenly Contoured, posterior steel stays provide additional support Conforms to patient’s anatomical shape for optimal fit Indications: Lumbar and lower thoracic spine sprains/strains, step down brace -
The T37 limits anterior, posterior and lateral movements. It offers continuous adjustment of sternal, lateral and pelvic padded plates for better fit. It has an adjustable pelvic band, adjustable height and width, and a swivel sternal pad. The posterior pad may be used horizontally or vertically. The latch-lock clamp closure allows ease of donning and doffing. Equivalent to a "Jewett" brace. -
Material: Aluminum Connection: Male Hole Inner Diameter: 10 mm / 0.4 in Product Weight: 90 g / 3.2 oz Weight Limit: 160 kg / 350 lb -
- Arrives ready to install
- Natural looking, sandal toe foot shell
- Pyramid and spacer can be removed for Symes patient application
-
- Lightweight
- One standard Delrin keel per foot size
- Propels amputee through cadence
- Natural looking Lightfoot Foot Shell available in both light and dark
-
The Matrix line of AFOs from Trulife are made with an energy-storing composite footplate, an open calcaneal design, and a lateral strut. The foot plate can be trimmed for best fit and the padded anterior shell is height-adjustable. The carbon is warranted for one year and the softgoods for 90 days. Two tibial pads are included. Matrix SuperMax is the ultimate Matrix AFO, with a uniquely-designed footplate to provide greater energy reflection at toe off. The shank angle is increased to 82° to improve knee extension movement at mid stance. Suitable for low to high activity patients with unilateral or bilateral drop foot, peroneal nerve palsy, incomplete paralyses, CVA or CMT. -
The Matrix line of AFOs from Trulife are made with an energy-storing composite footplate, an open calcaneal design, and a lateral strut. The foot plate can be trimmed for best fit and the padded anterior shell is height-adjustable. The carbon is warranted for one year and the softgoods for 90 days. Two tibial pads are included. Matrix Max is Trulife’s bestselling Matrix AFO. The reinforced lateral strut, made of lightweight carbon composite, provides enhanced stability. Suitable for low to high activity patients with unilateral or bilateral drop foot, as well as partial foot amputations. -
This is a sternal occipital mandibular immobilizer. It immobilizes the head in a practitioner specified position, and allows the patient to lie flat. It is easy to fit in the supine position, and it has a removable chin support. Indications: C4/5–T3/4 stable fractures, post-operative stabilization -
The T34 has an anatomically designed pubic pad and pelvic bar that prevent pressure spots and migration. The sternal pad swivels to eliminate pressure as well. The latch-lock clamp closure allows easy donning and doffing. The T34 is also height and width adjustable. -
Industry standard in reliable suction Lightweight design -
Material: Aluminum Diameter: 30 mm Length: 42 cm/16.5 in Connection: Female Product Weight: 324 g / 11.4 oz Weight Limit: 160 kg / 350 lb -
- All the benefits of the Kinetic Light with the addition of a removable, sandal toe foot shell and a more lively keel
- Low profile composite keel with multi-axial ankle
- Male pyramid attachment
- Ideal for patients on the edge of advancing to a K3 product
-
- Dynamic toe and cushioned heel response
- Full length, split composite keel for increased stability
- Removable, life-like, sandal-toe foot shell
- Pre-assembled with male pyramid for easy installation
- Pyramid and spacer can be removed for Symes patient application
-
- Lightweight, 4-bar, polycentric design
- Friction swing control and extension assist
- Adjustable stability control
- Free motion setting available
- Rotatable knee disarticulation adapter available (SSK610A-DIS)
-
- 7° of adjustable stance flexion
- Friction swing phase control
- Shock absorption at heel strike
- Extension assist
- Built-in proximal pyramid and distal tube adapter
-
- Polycentric, 4-bar friction control knee with manual lock
- A lightweight, durable knee that can be used in locked position or free motion
- Constant friction braking mechanisms and spring-loaded extension assist helps to create a natural gait
- Built-in proximal pyramid
-
- Polycentric, pneumatic 5-bar knee
- 9° of adjustable stance flexion
- Shock absorption at heel strike
- Independently adjustable pneumatic flexion and extension control
- Available with built-in proximal pyramid or threaded adapter
- Equipped with a built-in knee cap, preventing clothing from getting caught in the mechanism
-
Polycentric, pneumatic 5-bar knee 9° of adjustable stance flexion Shock absorption at heel strike Independently adjustable pneumatic flexion and extension control Available with built-in proximal pyramid or threaded adapter Equipped with a built-in knee cap, preventing clothing from getting caught in the mechanism -
The Mounting Plate includes: • the expulsion valve assembly • a lamination plug which keeps the center threaded hole free of resin during the lamination process, and also serves as a drill guide for the final socket vent hole • a lamination dam which keeps the distal surface clean and free of resin during the lamination process Mounting pattern: 4 x M6 threads on Ø2.00″ (Ø50.8 mm) bolt circle The expulsion valve and lamination plug do not require any special tool -
- Dynamic response
- Smooth rollover and controlled plantar flexion
- Flexible shank provides axial rotation and multi-axial articulation
- Dynamic full length composite keel, split for compliance and stability on uneven surfaces
- Optional toe wedges are provided to increase dorsiflexion resistance and mid-stance stability
- Similar to the Triumph, but a lighter foot
-
Material: Aluminum Length: 37mm / 1.45 in (A-P) Number of grooves: One Connection: Male M8 Thread Product weight: 33 g / 1.2 oz Weight limit: 65 kg / 144 lb -
Rotatable: Yes Material: Stainless Steel Product Weight: 107 g / 3.8 oz Weight Limit: 136 kg / 300 lb -
Material: Aluminum Number of Grooves: One (1) Length: 51 mm / 2 in (A-P) Connection: Male M10 Thread Product Weight: 67 g / 2.4 oz Weight Limit: 136 kg / 300 lb -
- Easy rollover
- Lightweight
-
- K2 impact level
- Integrated multi-axial ankle
- Proximal female pyramid
- Full length, composite keel
- Sandal toe foot shell (non-removable)
-
• Trulife’s heavy-duty foot withstands up to 450 lb! • Durable composite design for K3 users • Pre-assembled with a male pyramid for quick and easy installation • Split composite keel for increased stability • Dynamic toe and cushioned heel response • Removable, life-like, sandal-toe foot shellIndications:
Low to medium impact levels, K3, maximum weight of 205 kg /450 lb* -
- Low profile foot for long residual limb
- Multi-axial
- C-shape replicates true, anatomical plantar flexion
- Full length, split, composite keel for stability on uneven surfaces
- Removable foot shell
-
- K2 foot with integrated multi-axial ankle
- Proximal male pyramid
- Full length, composite keel
- Sandal toe foot shell (non-removable)
- Integrated ankle function for all categories is the same as the existing Kinetic
-
- Pediatric model of the Energy
- Dynamic toe and cushioned heel response
- M8 foot bolt attachment
- Non-removable, sandal-toe foot shell (size 16-21 cm)
- High weight limit of 65 kg / 144 lb
-
The DynaWalk is the ideal foot for patients who want a natural walking experience. This foot has a plastic core, which makes walking feel safe and comfortable. There is a DynaWalk foot for each mobility class, and the M2LP and M3LP were designed to meet the needs of the patient with a long residual limb (total fitted height is 38mm and heel height is 10mm). The DynaWalk’s foot shell was designed to have the anatomical shape of a real foot for increased patient acceptance. It has a split toe for use with sandals, and it is also splash-proof so it can be used in the shower. Comes without a pyramid.
