-
Engineered To Exceed Your Expectations. Fabtech Systems PLUSeries™ 25 and 60-second structural urethane adhesives are a versatile and fast two part urethane system used for bonding and repairing plastics, composites, aluminum, steel, plaster and pretty much anything you can think of commonly used in the O&P manufacturing process. Since it’s a structural adhesive, it is stronger than the brittle, fracture prone acrylics commonly used in our industry today. These urethanes are so strong you can even drill and tap them! We’re confident you’ll never want to use smelly toxic acrylics again. Get More Than You Asked For. Fabtech Systems PLUSeries™ urethane adhesives are engineered to save professionals time and money while providing the best possible end result. PLUSeries™ adhesives cut out 95% of process and working times commonly associated with current acrylic adhesives. Best of all, PLUSeries™ adhesives have low to no odor and can be used anywhere in your facility. Faster. Stronger. Better. Compared to most commonly used acrylics that require time consuming preparation – Such as gathering needed materials, measuring in additives such as thickening agents and promoters, PLUSeries™ cartridge adhesives simply require adding new dispensing tips. Chosse between 25 to 60 seconds and you’re ready to go. It’s that easy! A Higher Degree of Performance and Ease. If you are tired of managing sticky, messy, smelly large cans of acrylic resin? So are we! Simply load a 50 or 220ml adhesive cartridge into the appropriate dispensing gun, twist off the cap, insert a static mixing tip and apply the adhesive where you need it with no dripping or running. -
These PVA bags are manufactured in a climate controlled clean room utilizing the latest computer controlled equipment. They are incredibly consistent and have a far greater breaking tolerance than any other PVA bag on the market, so you won't have to worry about inconsistent seams or blowouts as you are stringing your resin -
Engineered for consistent delivery of +PLUSeries adhesives, Fabtech tips are validated through certified testing to guarantee the structural properties required for O&P applications. Disposable static mixers sold in bags of 6, 72 and 144. -
Combines the lightweight strength of fiberglass with the elasticity of nylon. This is a cost-saving choice for everyday sockets. Our blend of 65% fiberglass and 35% stretch nylon works well with polyester and acrylic resins for a smooth appearance without any ribs or runs. It is form fitting with 230% stretch -
New lighter weight, uni-directional carbon tape for optimum strength. -
- Easy to use
- 100% first quality material
- Improved clean release
- Sheer knit creates an excellent finish
-
This Carbon Braid from ST&G has a 12K strand count, and it is designed for improved polyester and fiber interface. It features decreased fraying, which results in less dust. Available in 3, 4, 5, 6, 8 and 10 inch widths, and 10 and 50 foot lengths. -
Engineered To Exceed Your Expectations. Fabtech Systems PLUSeries™ 25 and 60-second structural urethane adhesives are a versatile and fast two part urethane system used for bonding and repairing plastics, composites, aluminum, steel, plaster and pretty much anything you can think of commonly used in the O&P manufacturing process. Since it’s a structural adhesive, it is stronger than the brittle, fracture prone acrylics commonly used in our industry today. These urethanes are so strong you can even drill and tap them! We’re confident you’ll never want to use smelly toxic acrylics again. Get More Than You Asked For. Fabtech Systems PLUSeries™ urethane adhesives are engineered to save professionals time and money while providing the best possible end result. PLUSeries™ adhesives cut out 95% of process and working times commonly associated with current acrylic adhesives. Best of all, PLUSeries™ adhesives have low to no odor and can be used anywhere in your facility. Faster. Stronger. Better. Compared to most commonly used acrylics that require time consuming preparation – Such as gathering needed materials, measuring in additives such as thickening agents and promoters, PLUSeries™ cartridge adhesives simply require adding new dispensing tips. Chosse between 25 to 60 seconds and you’re ready to go. It’s that easy! A Higher Degree of Performance and Ease. If you are tired of managing sticky, messy, smelly large cans of acrylic resin? So are we! Simply load a 50 or 220ml adhesive cartridge into the appropriate dispensing gun, twist off the cap, insert a static mixing tip and apply the adhesive where you need it with no dripping or running. -
The strongest and easiest-to-use resin system available. Fabtech Systems RESTECH+ Advanced Epoxy Resin is formulated with Advanced Polymers, designed to take repetitive abuse demanded from laminated composite orthotics and prosthetics. Restech+ is a two-part low viscosity epoxy-amine resin designed for wet laminated of carbon, glass, aramids and other polymer fiber reinforcements. Positive new features:- Fastest Curing Time
- Easy 2:1 mixing By Volume
- Superior toughened Resin Matrix
- Crystal Clear
- High Luster Finish
- Thin High Flow Viscosity
- Vacuum Socket Approved & Tested
- Unperceivable Shrinkage
- 3 Year Shelf Life
- Non-Hazmat Shipping
- Sold Kit, Individual Side and Gallon
-
Formulated to be airtight for making an airtight socket for elevated vacuum suspension systems. Exhibits higher strength and rigidity than competing epoxy acrylic resins. Provides superior fibre wet out and working characteristics. Excellent for use with carbon fiber and other new age composite material such as Kevlar, Spectra, Synthex, Basalt, etc. Contains increased renewable content and less material derived from petroleum sources. High strength and toughness provided by the Nano technology assures your patients are getting the very best. Use of certain pigments can decrease working time. Paste promotor included. Non-hazmat. -
- Lighter than carbon fiber
- No flying fibers – Does not micro fiber when ground
- No discomfort or itchy sensation on your skin which is often common when working with carbon fiber
- Better cohesiveness with resin compared to carbon fiber
- The resin soaks through the fiber braid easier than carbon fiber braid resulting in less resin per volume of the braid which means lighter socket
- More cost effective than carbon fiber
- Provides great fatigue strength for the socket
- Tested in socket form under ISO guidelines for patients up to 300 lbs
-
Optimized molecular weight gives a lower viscosity and decreased surface tension providing a superior fiber wet out that complements fiberglass and carbon material. Saturates low layup materials easily because of low viscosity. Low viscosity is ideal for carbon and fiberglass materials. Non-hazmat. Paste promoter included. -
ST&G’s Carbon Braid has a 12K strand count, and it is designed for improved polyester and fiber interface. It features decreased fraying, which results in less dust. Available in 3, 4, 5, 6, 8 and 10 inch widths, and 10 and 50 foot lengths. -
This fabric is extremely tightly woven and is commonly used in aerospace and other high quality applications. Meets MIL-C-9084C, Type III. Our carbon braid is sold by the pound from the manufacturer. Yield is based on a feet-per-pound ratio because of its tendency to elongate significantly. Most other carbon is pulled off of a spool and cut at its stretched length, dramatically affecting yield. At Fabtech, we weigh our carbon so our customer is guaranteed to get what they are paying for. -
VELCRO® Brand sew-on fasteners provide durable easy-to-use fabric closures. Can be used instead of buttons, snaps or zippers and are washable by machine or dry cleaning. Hand or machine-stitch around the edges of the tape and backstitch to secure. -
If you like NSP from ST&G, they are now providing NSP Tape. NSP Tape gives you a strong socket that is lighter and more cost-effective than carbon fiber. Available in 1 and 3 inch widths, and 30 foot lengths. Features:- Provides great fatigue strength for the socket
- Green eco-friendly natural fiber
- Lighter and stronger than carbon tape with half the stiffness
- Offers 10x the impact resistance than carbon tape
- Keeps labs clean due to enhanced fiber saturation
- No itch
- Tested in socket form under ISO guidelines for patients up to 500 lbs
-
This unique fabric sheet with pressure sensitive adhesive back provides versatile application for prosthetic and orthotic needs. UNI-GRIP’s biased direction texture provides grip in one direction while providing free glide in the other direction. One sheet has 8 strips.
Some of the possible applications:- Restrict rotation of stump in AK socket
- Suspension for BK and AK socket
- Prevent pistoning of the stump in the socket
- Restrict migration of orthotics
-
For smooth, conforming, light and strong lamination. Thinner and lighter without sacrificing strength. Conforms and wets out better with resin. Cost comparable to regular carbon. -
- Lighter than carbon fiber
- No flying fibers – Does not micro fiber when ground
- No discomfort or itchy sensation on your skin which is often common when working with carbon fiber
- Better cohesiveness with resin compared to carbon fiber
- The resin soaks through the fiber braid easier than carbon fiber braid resulting in less resin per volume of the braid which means lighter socket
- More cost effective than carbon fiber
- Provides great fatigue strength for the socket
- Tested in socket form under ISO guidelines for patients up to 300 lbs
-
Engineered To Exceed Your Expectations. Fabtech Systems PLUSeries™ 25 and 60-second structural urethane adhesives are a versatile and fast two part urethane system used for bonding and repairing plastics, composites, aluminum, steel, plaster and pretty much anything you can think of commonly used in the O&P manufacturing process. Since it’s a structural adhesive, it is stronger than the brittle, fracture prone acrylics commonly used in our industry today. These urethanes are so strong you can even drill and tap them! We’re confident you’ll never want to use smelly toxic acrylics again. Get More Than You Asked For. Fabtech Systems PLUSeries™ urethane adhesives are engineered to save professionals time and money while providing the best possible end result. PLUSeries™ adhesives cut out 95% of process and working times commonly associated with current acrylic adhesives. Best of all, PLUSeries™ adhesives have low to no odor and can be used anywhere in your facility. Faster. Stronger. Better. Compared to most commonly used acrylics that require time consuming preparation – Such as gathering needed materials, measuring in additives such as thickening agents and promoters, PLUSeries™ cartridge adhesives simply require adding new dispensing tips. Chosse between 25 to 60 seconds and you’re ready to go. It’s that easy! A Higher Degree of Performance and Ease. If you are tired of managing sticky, messy, smelly large cans of acrylic resin? So are we! Simply load a 50 or 220ml adhesive cartridge into the appropriate dispensing gun, twist off the cap, insert a static mixing tip and apply the adhesive where you need it with no dripping or running. -
- 100% Nylon
- Excellent for vacuum forming
- Compatible with all types of resins.
- Stretches up to 300%
-
Engineered for consistent delivery of +PLUSeries & Bondtek adhesives, our tips are validated through certified testing to guarantee the structural properties required for O&P applications. Disposable 50ml static mixers sold in bags of 6, 72, and 144.FEATURES
Easy to apply locking hub design H – tapered end for precise placement of adhesives Disposable -
2nd generation non-hazmat resin offering high performance and ease of use. ECO is our greenest laminating resin with zero hazardous air pollutants. Low odor and zero volatiles formulation minimizes the release of potentially hazardous chemicals creating a safer work environment. Laminates without bubbles and with a very good fiber wet out which allows high translation of fiber properties. 10-12 minute cure time at room temperature without heat. Paste promoter included. Non-hazmat. -
Paralex blends Carbon and NSP to create a new and dynamic hybrid material. This material provides stiffness and strength at ½ the weight, thin laminations and durability. The NSP material within the Paralex can create incredible color combinations when using pigment. -
ECO Extreme is a Non-Hazmat laminating resin that offers unmatched strength and ease of use. Laminates using this resin show a significant increase in flexural strength over those fabricated with industry standard resins. ECO Extreme is designed to acheive a high modulus allowing the fabrication of thin and and rigid laminates -
- Easy to use design
- Works with 200ml and 220ml cartridges
- One time purchase
-
Provides the greatest strength and stiffness for its weight. Carbon woven tapes available in 5.7oz. per sq. yd. 45-45 weave pattern. -
Coated, light metal with lacquered angle iron. Suitable for row connection. Sealing of vacuum by long-life, extremely elastic and exchangeable rubber-membrane. Working surface: 50 x 28 cm Over-all measurement (in cm): 37 L x 44 W x 16 H Weight: 11.5 kg
